The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-300-8928, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 16 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5910-01-300-8928 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | CANCELLED |
| Terminal Diameter | 0.025 INCHES NOMINAL IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Body Width | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Body Height | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Reliability Failure Rate Level in Percent | 0.001 |
| Nonderated Continuous Voltage Rating and Type Per Section | 200.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION |
| Body Length | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Dissipation Factor at Reference Temp in Percent | 0.150 |
| Capacitance Value Per Section | 150.000 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | PLASTIC CASE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | CANCELLED |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SR151A151KAT | C/1 Advisory reference — outside the item-of-supply concept Kyocera Avx Components Corporation |
| B37979G0151K100 | C/1 Advisory reference — outside the item-of-supply concept Siemens Corp |
| A3088717-28 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 0160-4764 | C/1 Advisory reference — outside the item-of-supply concept Hewlett-Packard Company Dba HP |
| CC09CG151G | 5/9 Secondary reference U.S. Government activity |
| MIL-PRF-20/35 | 4/1 Identification reference U.S. Government activity |
| CC09CG151J | 5/9 Secondary reference U.S. Government activity |
| 10128286 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| SR151A151KAA | C/1 Advisory reference — outside the item-of-supply concept Kyocera Avx Components Corporation |
| MIL-C-20/35 | 5/9 Secondary reference U.S. Government activity |
| CCR09CG151M | 5/9 Secondary reference U.S. Government activity |
| CCR09CG151GR | 5/9 Secondary reference U.S. Government activity |
| SR151A151JAA | C/1 Advisory reference — outside the item-of-supply concept Kyocera Avx Components Corporation |
| CCR09CG151GS | 2/2 Government specification standardization U.S. Government activity |
| 5018EO100RD151G | C/1 Advisory reference — outside the item-of-supply concept Illinois Tool Works Inc Emcon Div |
| CCR09CG151GR | C/1 Advisory reference — outside the item-of-supply concept Bionex Medical Industries |
NSN 5910-01-300-8928 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: cancelled.
Key specifications for 5910-01-300-8928: Terminal Diameter: 0.025 INCHES NOMINAL IN; Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 0.0 SINGLE SECTION; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION. 24 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5910-01-300-8928 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.