The Capacitor,fixed,metallized,paper, cataloged under National Stock Number 5910-01-295-7002, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-295-7002 |
| Item Name | Capacitor,fixed,metallized,paper |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Body Style | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 70.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 0.500 INCHES MAXIMUM IN |
| Body Width | 1.250 INCHES NOMINAL IN |
| Body Height | 3.000 INCHES NOMINAL IN |
| Nonderated Continuous Voltage Rating and Type Per Section | 440.0 AC-RMS SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Body Length | 2.080 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 0.6000 |
| Capacitance Value Per Section | 4.000 MICROFARADS SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Terminal Type and Quantity | 2 QUICK DISCONNECT, MALE, FOUR BLADE |
| Center to Center Distance Between Terminals Parallel to Length | 0.810 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | N |
| Reference | Meaning |
|---|---|
| P50G4404E | 3/9 Design control — primary reference Aerovox Corp. |
NSN 5910-01-295-7002 is a Capacitor,fixed,metallized,paper, classified under FSC 5910, Capacitors. Status: active.
Key specifications for 5910-01-295-7002: Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 70.0 CELSIUS MAXIMUM DEGC; Terminal Surface Treatment: SOLDER. 15 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5910-01-295-7002 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.