PartsTable TECHNICAL DATA SHEET
NSN 5910-01-295-4481Government record, cited

Capacitor, Fixed, Electrolytic5910-01-295-4481

NSN 5910-01-295-4481 · NIIN 012954481
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-295-4481 · 5910012954481 · NIIN 012954481 · 01-295-4481 · FSC 5910 Capacitors · 120125034 · 686RSM035MPX
Nearby stock numbers  ·
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Body Diameter: 0.315 INCHES NOMINAL IN
  • Terminal Diameter: 0.024 INCHES NOMINAL IN
  • Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END
  • Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 0.787 INCHES MINIMUM IN
Identification
  • NSN: 5910-01-295-4481
  • NIIN: 012954481
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-295-4481, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-295-4481
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Body Diameter0.315 INCHES NOMINAL IN
Terminal Diameter0.024 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES, TERMINAL(S) ON ONE END
Tolerance Range Per Section-20.00 TO 20.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length0.787 INCHES MINIMUM IN
Electrical PolarizationPOLARIZED
Center to Center Distance Between Terminals Parallel to Diameter0.138 INCHES NOMINAL IN
Equivalent Series Resistance at Reference Temp in Ohms2.34
Anode TypePLAIN FOIL
Nonderated Continuous Voltage Rating and Type Per Section35.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Case Insulation MaterialPLASTIC
Impedance at Minimum Operating Temp in Ohms2.0
Body Length0.453 INCHES NOMINAL IN
Dissipation Factor at Reference Temp in Percent0.120
Capacitance Value Per Section68.000 MICROFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Capacitive Electrode MaterialALUMINUM
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
DC Leakage at Reference Temp15.000 MICROAMPERES
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5910-01-354-5149 POSSIBLE MATCH
CAPACITOR,FIXED,ELECTROLYTIC
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
120125034 C/1 Advisory reference — outside the item-of-supply concept
Eaton Corporation
686RSM035MPX 3/9 Design control — primary reference
Illinois Capacitor Inc
Related Parts
5910-01-354-5149POSSIBLE MATCH
CAPACITOR,FIXED,ELECTROLYTIC

Frequently Asked Questions

What is NSN 5910-01-295-4481?

NSN 5910-01-295-4481 is a Capacitor,fixed,electrolytic, classified under FSC 5910, Capacitors. Status: active.

What NSN replaces 5910-01-295-4481?

1 possible match (shared part number, not a government interchangeability claim): 5910-01-354-5149. Verify interchangeability with system specifications before substitution.

What are the specifications of 5910-01-295-4481?

Key specifications for 5910-01-295-4481: Body Diameter: 0.315 INCHES NOMINAL IN; Terminal Diameter: 0.024 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END; Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-295-4481 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com