The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-277-4355, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5910-01-277-4355 |
| Item Name | Capacitor,fixed,electrolytic |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | CANCELLED |
| Body Diameter | 0.274 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN |
| DC Leakage at Maximum Operating Temp | 150.0 MICROAMPERES |
| Terminal Diameter | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN |
| Body Style | W/O MTG FACILITIES, AXIAL TERMINALS |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC |
| Terminal Length | 1.250 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| Electrical Polarization | POLARIZED |
| Criticality Code Justification | FEAT |
| Equivalent Series Resistance at Reference Temp in Ohms | 0.07 |
| Anode Type | SOLID |
| Reliability Failure Rate Level in Percent | 0.001 |
| Features Provided | HERMETICALLY SEALED CASE |
| Nonderated Continuous Voltage Rating and Type Per Section | 10.0 DC SINGLE SECTION |
| Schematic Diagram Designator | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| Case Insulation Material | PLASTIC |
| Specification/standard Data | 81349-MIL-C-39003/9 GOVERNMENT SPECIFICATION |
| Body Length | 0.655 INCHES MINIMUM AND 0.717 INCHES MAXIMUM IN |
| Dissipation Factor at Reference Temp in Percent | 8.000 |
| Capacitance Value Per Section | 120.000 MICROFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Capacitive Electrode Material | TANTALUM |
| Mil-Std-1276 Wire Lead Type Designator | N-4 |
| Test Data Document | 81349-MIL-C-39003 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| DC Leakage at Reference Temp | 6.000 MICROAMPERES |
| Acquisition Status | CANCELLED |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| M39003/09-0317 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| M39003/09-0217 | E/8 Replaced / superseded reference U.S. Government activity |
| M39003/09-2017 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| M39003/09-4017 | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-39003/9 | 4/1 Identification reference U.S. Government activity |
| MIL-C-39003/9 | 5/9 Secondary reference U.S. Government activity |
| M39003/09-0017 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| M39003/09-3017 | 5/9 Secondary reference U.S. Government activity |
| M39003/09-0117 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5910-01-277-4355 is a Capacitor,fixed,electrolytic, classified under FSC 5910, Capacitors. Status: cancelled.
2 possible matches (shared part number, not a government interchangeability claim): 5910-01-286-5528, 5910-01-498-3541. Verify interchangeability with system specifications before substitution.
Key specifications for 5910-01-277-4355: Body Diameter: 0.274 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN; DC Leakage at Maximum Operating Temp: 150.0 MICROAMPERES; Terminal Diameter: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN; Body Style: W/O MTG FACILITIES, AXIAL TERMINALS. 26 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5910-01-277-4355 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.