PartsTable TECHNICAL DATA SHEET
NSN 5910-01-252-2768Government record, cited

Capacitor, Fixed, Ceramic Dielectr5910-01-252-2768

NSN 5910-01-252-2768 · NIIN 012522768
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-252-2768 · 5910012522768 · NIIN 012522768 · 01-252-2768 · FSC 5910 Capacitors · 5538032-2 · 914-3502-040 · MIL-PRF-55681/4 · MIL-C-55681/4 · CDR13BG3R0EBMR
Nearby stock numbers  ·
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 90.0 SINGLE SECTION
  • Body Style: CHIP TYPE
  • Tolerance Range Per Section: -0.10 TO 0.10 PICOFARADS SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: PALLADIUM AND SILVER
  • Terminal Length: 0.015 INCHES NOMINAL IN
  • Body Width: 0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
Identification
  • NSN: 5910-01-252-2768
  • NIIN: 012522768
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-252-2768, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-252-2768
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius90.0 SINGLE SECTION
Body StyleCHIP TYPE
Tolerance Range Per Section-0.10 TO 0.10 PICOFARADS SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentPALLADIUM AND SILVER
Terminal Length0.015 INCHES NOMINAL IN
Body Width0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
Body Height0.030 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
Reliability Failure Rate Level in Percent0.010
Nonderated Continuous Voltage Rating and Type Per Section500.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Specification/standard Data81349-MIL-C-55681/4 GOVERNMENT SPECIFICATION
Body Length0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
Capacitance Value Per Section3.000 PICOFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Insulation Resistance at Maximum Operating Temp100000.0 MEGOHMS
Precious Material and LocationTERMINAL SURFACES PALLADIUM AND TERMINAL SURFACES SILVER
Test Data Document81349-MIL-C-55681 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialCERAMIC CASE
Terminal Type and Quantity2 BONDING PAD
Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius-20.0 TO 20.0 SINGLE SECTION
Center to Center Distance Between Terminals Parallel to Length0.015 INCHES NOMINAL IN
Insulation Resistance at Reference Temp1000000.0 MEGOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
5538032-2 C/1 Advisory reference — outside the item-of-supply concept
Naval Sea Systems Command
914-3502-040 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
MIL-PRF-55681/4 4/1 Identification reference
U.S. Government activity
MIL-C-55681/4 5/9 Secondary reference
U.S. Government activity
CDR13BG3R0EBMR 2/2 Government specification standardization
U.S. Government activity
CDR13BG3R0EBMM C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
10246-0043 C/1 Advisory reference — outside the item-of-supply concept
Honeywell International Inc Dba Honeywell

Frequently Asked Questions

What is NSN 5910-01-252-2768?

NSN 5910-01-252-2768 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-01-252-2768?

Key specifications for 5910-01-252-2768: Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 90.0 SINGLE SECTION; Body Style: CHIP TYPE; Tolerance Range Per Section: -0.10 TO 0.10 PICOFARADS SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-252-2768 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com