The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-249-2695, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-249-2695 |
| Primary Part Number | MIL-C-11015/12 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Terminal Length | 1.250 INCHES NOMINAL IN |
| Test Data Document | 81349-MIL-C-11015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Center to Center Distance Between Terminals Parallel to Diameter | 0.375 INCHES NOMINAL IN |
| Voltage Temp Limits Per Section in Percent Capacitance Change | -70.0 TO 30.0 WITH 500 VOLTS APPLIED SINGLE SECTION |
| Specification/standard Data | 81349-MIL-C-11015/12 GOVERNMENT SPECIFICATION |
| Tolerance Range Per Section | -20.00 TO 20.00 PERCENT SINGLE SECTION |
| Capacitance Value Per Section | 10000.000 PICOFARADS SINGLE SECTION |
| Nonderated Continuous Voltage Rating and Type Per Section | 1000.0 DC SINGLE SECTION |
| Body Length | 0.120 INCHES NOMINAL IN |
| Terminal Diameter | 0.032 INCHES NOMINAL IN |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC |
| Body Diameter | 0.660 INCHES NOMINAL IN |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Terminal Surface Treatment | SOLDER |
| Insulation Resistance at Reference Temp | 200000.0 MEGOHMS |
| Material | PLASTIC CASE |
| Dissipation Factor at Reference Temp in Percent | 2.000 |
| Body Style | W/O MTG FACILITIES, RADIAL TERMINALS |
| Reliability Indicator | NOT ESTABLISHED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-C-11015/12 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| CK63AY103ME | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-01-249-2695 is a Capacitor,fixed,ceramic Dielectr, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-01-249-2695 has 2 cross-referenced part numbers: MIL-C-11015/12 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CK63AY103ME (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5910-01-249-2695: 5910-00-109-1987, 5910-00-822-5683, 5910-00-838-0869 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-C-11015/12: End Item Identification: 1430-01-087-6338 ENGAGEMENT CONTROL; Terminal Length: 1.250 INCHES NOMINAL IN; Test Data Document: 81349-MIL-C-11015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Center to Center Distance Between Terminals Parallel to Diameter: 0.375 INCHES NOMINAL IN. 21 total characteristics are documented in the Federal Logistics Information System.