PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

59394Capacitor,fixed,electrolytic

Espey Mfg. & Electronics Corp. · NSN 5910-01-233-1954 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-01-233-1954 — this item is cataloged by the U.S. Government under National Stock Number 5910-01-233-1954. Primary manufacturer part number: 59394.
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Schematic Diagram Designator: ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
  • Capacitive Electrode Material: TANTALUM
  • Terminal Type and Quantity: 8 UNINSULATED WIRE LEAD
  • Anode Type: SOLID
  • DC Leakage at Reference Temp: 9.000 MICROAMPERES
  • Body Length: 1.062 INCHES NOMINAL IN
  • Capacitance Value Per Section: 86.000 MICROFARADS ALL SECTIONS
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-233-1954, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Espey Mfg. & Electronics Corp.. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-233-1954
Primary Part Number59394
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerEspey Mfg. & Electronics Corp.
StatusACTIVE
Schematic Diagram DesignatorELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
Capacitive Electrode MaterialTANTALUM
Terminal Type and Quantity8 UNINSULATED WIRE LEAD
Anode TypeSOLID
DC Leakage at Reference Temp9.000 MICROAMPERES
Body Length1.062 INCHES NOMINAL IN
Capacitance Value Per Section86.000 MICROFARADS ALL SECTIONS
Terminal Surface TreatmentSOLDER
Body Diameter0.375 INCHES NOMINAL IN
Terminal Diameter0.025 INCHES NOMINAL IN
Terminal Length2.250 INCHES NOMINAL IN
DC Leakage at Maximum Operating Temp36.0 MICROAMPERES
Electrical PolarizationPOLARIZED
Tolerance Range Per Section-10.00 TO 10.00 PERCENT ALL SECTIONS
Impedance at Minimum Operating Temp in Ohms30.0
Nonderated Continuous Voltage Rating and Type Per Section100.0 DC ALL SECTIONS
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Case Insulation MaterialPLASTIC
Section Quantity4
Dissipation Factor at Reference Temp in Percent10.000
Body StyleW/O MTG FACILITIES, AXIAL TERMINALS
Reliability IndicatorNOT ESTABLISHED
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 1
3040-00-703-1518SM-C-321720 INTERCHANGEABLE
Shaft,shouldered
Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
Cross-Reference Index
Part NumberManufacturer
59394 Espey Mfg. & Electronics Corp. (USA)
59394 Espey Mfg and Electronics Corp (USA)
Related Parts
3040-00-703-1518INTERCHANGEABLE
SHAFT,SHOULDERED
SM-C-321720

Frequently Asked Questions

What is NSN 5910-01-233-1954?

NSN 5910-01-233-1954 is a Capacitor,fixed,electrolytic, manufactured by Espey Mfg. & Electronics Corp., classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-01-233-1954?

NSN 5910-01-233-1954 has 2 cross-referenced part numbers: 59394 (Espey Mfg. & Electronics Corp.), 59394 (Espey Mfg and Electronics Corp).

What NSN replaces 5910-01-233-1954?

There is 1 known substitute for 5910-01-233-1954: 3040-00-703-1518. Verify interchangeability with system specifications before substitution.

What are the specifications of 59394?

Key specifications for 59394: Schematic Diagram Designator: ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL; Capacitive Electrode Material: TANTALUM; Terminal Type and Quantity: 8 UNINSULATED WIRE LEAD; Anode Type: SOLID. 22 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com