The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-211-9243, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-211-9243 |
| Primary Part Number | 11443201-2 |
| Item Name | Capacitor,fixed,electrolytic |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Terminal Diameter | 0.025 INCHES MAXIMUM IN |
| Body Style | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Length | 1.500 INCHES NOMINAL IN |
| Electrical Polarization | POLARIZED |
| Body Width | 0.367 INCHES MAXIMUM IN |
| Equivalent Series Resistance at Reference Temp in Ohms | 0.04 |
| Anode Type | SOLID |
| Reliability Failure Rate Level in Percent | 0.1000 |
| Nonderated Continuous Voltage Rating and Type Per Section | 6.0 DC SINGLE SECTION |
| Schematic Diagram Designator | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| Case Insulation Material | PLASTIC |
| Body Length | 0.817 INCHES MAXIMUM IN |
| Dissipation Factor at Reference Temp in Percent | 12.0000 |
| Capacitance Value Per Section | 330.000 MICROFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Capacitive Electrode Material | TANTALUM |
| Test Data Document | 81349-MIL-C-39003 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| DC Leakage at Reference Temp | 15.000 MICROAMPERES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11443201-2 PRIMARY | Us Army Aviation and Missile Command (USA) |
| Reference | Meaning |
|---|---|
| 11443201-2 | 5/1 Secondary reference Kemet Electronics Corporation |
NSN 5910-01-211-9243 is a Capacitor,fixed,electrolytic, manufactured by Us Army Aviation and Missile Command, classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-211-9243 has 1 manufacturer part number on file: 11443201-2 (Us Army Aviation and Missile Command).
Key specifications for 11443201-2: Terminal Diameter: 0.025 INCHES MAXIMUM IN; Body Style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC. 21 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.