The Capacitor,fixed,plastic Dielectr, cataloged under National Stock Number 5910-01-211-9240, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-211-9240 |
| Primary Part Number | 11440553-2 |
| Item Name | Capacitor,fixed,plastic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 THREADED MOUNTING STUDS |
| Center to Center Distance Between Terminals Parallel to Width | 1.130 INCHES MAXIMUM IN |
| Terminal Diameter | 0.190 INCHES MAXIMUM IN |
| Body Style | W/MTG TABS/FLANGES TERMINALS ON OPPOSITE SURFACES |
| Tolerance Range Per Section | -10.00 TO 10.00 MICROFARADS SINGLE SECTION |
| Nonderated Operating Temp | -43.6 CELSIUS MINIMUM AND 71.0 CELSIUS MAXIMUM DEGC |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Length | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 0.680 INCHES MAXIMUM IN |
| Body Width | 1.610 INCHES MAXIMUM IN |
| Body Height | 1.610 INCHES MAXIMUM IN |
| Mounting Facility Screw Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Features Provided | HERMETICALLY SEALED CASE |
| Nonderated Continuous Voltage Rating and Type Per Section | 265.0 AC-RMS SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Nominal Thread Size | 0.164 INCHES IN |
| Case Insulation Material | PLASTIC |
| Body Length | 2.550 INCHES MAXIMUM IN |
| Dissipation Factor at Reference Temp in Percent | 0.2000 |
| Capacitance Value Per Section | 2.300 MICROFARADS SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Dielectric Material | PLASTIC |
| Test Data Document | 81349-MIL-C-39022 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 2 THREADED STUD |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11440553-2 PRIMARY | Us Army Aviation and Missile Command (USA) |
| 160-1566 | Ems Development Corporation Dba Ems Development Corp (USA) |
| 2A241-235A | Bycap Inc (USA) |
| Reference | Meaning |
|---|---|
| 160-1566 | 5/9 Secondary reference Spellman High-Voltage Electronics Corporation Dba Spellman High-Voltage Electronics Corp |
NSN 5910-01-211-9240 is a Capacitor,fixed,plastic Dielectr, manufactured by Us Army Aviation and Missile Command, classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-211-9240 has 3 manufacturer part numbers on file: 11440553-2 (Us Army Aviation and Missile Command), 160-1566 (Ems Development Corporation Dba Ems Development Corp), 2A241-235A (Bycap Inc).
Key specifications for 11440553-2: Mounting Facility Type and Quantity: 4 THREADED MOUNTING STUDS; Center to Center Distance Between Terminals Parallel to Width: 1.130 INCHES MAXIMUM IN; Terminal Diameter: 0.190 INCHES MAXIMUM IN; Body Style: W/MTG TABS/FLANGES TERMINALS ON OPPOSITE SURFACES. 26 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.