The Capacitor,fixed,plastic Dielectr, cataloged under National Stock Number 5910-01-206-5824, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-206-5824 |
| Primary Part Number | 11440554-2 |
| Item Name | Capacitor,fixed,plastic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 THREADED MOUNTING STUDS |
| Terminal Diameter | 0.190 INCHES NOMINAL IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 25.0 SINGLE SECTION |
| Body Style | W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -10.00 TO 10.00 MICROFARADS SINGLE SECTION |
| Nonderated Operating Temp | 71.0 CELSIUS MAXIMUM DEGC |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Length | 3.445 INCHES NOMINAL IN |
| Terminal Surface Treatment | COPPER |
| Terminal Length | 0.620 INCHES MAXIMUM IN |
| Body Width | 1.810 INCHES MAXIMUM IN |
| Body Height | 2.205 INCHES MAXIMUM IN |
| Mounting Facility Screw Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 1.243 INCHES MAXIMUM IN |
| Reliability Failure Rate Level in Percent | 0.1000 |
| Features Provided | HERMETICALLY SEALED CASE |
| Nonderated Continuous Voltage Rating and Type Per Section | 1.0 AC-RMS SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Nominal Thread Size | 0.164 INCHES IN |
| Body Length | 2.800 INCHES MAXIMUM IN |
| Dissipation Factor at Reference Temp in Percent | 0.5000 |
| Capacitance Value Per Section | 20.000 MICROFARADS SINGLE SECTION |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.810 INCHES MAXIMUM IN |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 100000.0 MEGOHMS |
| Dielectric Material | PLASTIC |
| Test Data Document | 81349-MIL-C-39022 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 4 THREADED STUD |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11440554-2 PRIMARY | Us Army Aviation and Missile Command (USA) |
| Reference | Meaning |
|---|---|
| 160-1391 | 5/1 Secondary reference Spellman High-Voltage Electronics Corporation Dba Spellman High-Voltage Electronics Corp |
NSN 5910-01-206-5824 is a Capacitor,fixed,plastic Dielectr, manufactured by Us Army Aviation and Missile Command, classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-206-5824 has 1 manufacturer part number on file: 11440554-2 (Us Army Aviation and Missile Command).
Key specifications for 11440554-2: Mounting Facility Type and Quantity: 4 THREADED MOUNTING STUDS; Terminal Diameter: 0.190 INCHES NOMINAL IN; Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 25.0 SINGLE SECTION; Body Style: W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE. 28 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.