PartsTable TECHNICAL DATA SHEET
NSN 5910-01-146-9055Government record, cited

Capacitor, Fixed, Ceramic Dielectr5910-01-146-9055

NSN 5910-01-146-9055 · NIIN 011469055
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-146-9055 · 5910011469055 · NIIN 011469055 · 01-146-9055 · FSC 5910 Capacitors · MIL-C-39014/19 · M39014-19-0347 · M39014/19-0327
Nearby stock numbers  ·
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Body Diameter: 0.164 INCHES NOMINAL IN
  • Mounting Facility Type and Quantity: 1 THREADED BUSHING
  • Width Across Flats: 0.187 INCHES NOMINAL IN
  • Terminal Diameter: 0.100 INCHES NOMINAL IN
  • Body Style: W/THD MTG HOLE/STUD, TERMINAL(S) ON ONE END
  • Tolerance Range Per Section: -20.00 TO 80.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Identification
  • NSN: 5910-01-146-9055
  • NIIN: 011469055
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-146-9055, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-146-9055
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Body Diameter0.164 INCHES NOMINAL IN
Mounting Facility Type and Quantity1 THREADED BUSHING
Width Across Flats0.187 INCHES NOMINAL IN
Terminal Diameter0.100 INCHES NOMINAL IN
Body StyleW/THD MTG HOLE/STUD, TERMINAL(S) ON ONE END
Tolerance Range Per Section-20.00 TO 80.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Mounting Facility Screw Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Reliability Failure Rate Level in Percent1.0000
Nonderated Continuous Voltage Rating and Type Per Section200.0 DC SINGLE SECTION
Schematic Diagram DesignatorELECTRODE(S) GROUNDED TO CASE
Nominal Thread Size0.164 INCHES IN
Specification/standard Data81349-MIL-C-39014/19 GOVERNMENT SPECIFICATION
Body Length0.359 INCHES NOMINAL IN
Dissipation Factor at Reference Temp in Percent3.0000
Capacitance Value Per Section1000.000 PICOFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Insulation Resistance at Maximum Operating Temp10000.0 MEGOHMS
Terminal Height From Body0.236 INCHES MINIMUM AND 0.298 INCHES MAXIMUM IN
Test Data Document81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity1 FERRULE
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MIL-C-39014/19 4/1 Identification reference
U.S. Government activity
M39014-19-0347 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
M39014/19-0327 2/2 Government specification standardization
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5910 — Capacitors
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5910-00-000-1038
5910-00-000-1038 · Item name not on file
5910-00-000-1049
5910-00-000-1049 · Item name not on file
5910-00-000-1080
5910-00-000-1080 · Item name not on file
5910-00-000-6838
5910-00-000-6838 · Item name not on file
5910-00-001-1913
CAPACITOR,FIXED,METALLIZED,PAPER
5910-00-001-2576
CAPACITOR,VARIABLE,GLASS DIELECT
5910-00-001-2577
5910-00-001-2577 · Item name not on file
5910-00-001-2578
CAPACITOR,VARIABLE,GLASS DIELECT

Frequently Asked Questions

What is NSN 5910-01-146-9055?

NSN 5910-01-146-9055 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-01-146-9055?

Key specifications for 5910-01-146-9055: Body Diameter: 0.164 INCHES NOMINAL IN; Mounting Facility Type and Quantity: 1 THREADED BUSHING; Width Across Flats: 0.187 INCHES NOMINAL IN; Terminal Diameter: 0.100 INCHES NOMINAL IN. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-146-9055 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com