The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-146-1947, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Leonardo Uk Ltd. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 9 commercial cross-references from 7 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-146-1947 |
| Primary Part Number | 26577-42881 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Leonardo Uk Ltd |
| Status | ACTIVE |
| Test Data Document | 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Body Length | 0.092 INCHES NOMINAL IN |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Body Width | 0.260 INCHES NOMINAL IN |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 0.290 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN |
| Capacitance Value Per Section | 0.100 MICROFARADS SINGLE SECTION |
| Specification/standard Data | 81349-MIL-C-39014/22 GOVERNMENT SPECIFICATION |
| Terminal Type and Quantity | 2 PRINTED CIRCUIT |
| Body Height | 0.128 INCHES NOMINAL IN |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Nonderated Continuous Voltage Rating and Type Per Section | 50.0 DC SINGLE SECTION |
| Insulation Resistance at Maximum Operating Temp | 100.0 MEGOHM-MICROFARADS |
| Terminal Length | 0.128 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Material | PLASTIC CASE |
| Terminal Surface Treatment | SOLDER |
| Insulation Resistance at Reference Temp | 1000.0 MEGOHM-MICROFARADS |
| Dissipation Factor at Reference Temp in Percent | 0.1500 |
| Reliability Indicator | ESTABLISHED |
| Body Style | DUAL INLINE |
| Reliability Failure Rate Level in Percent | 0.0100 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 26577-42881 | Leonardo Uk Ltd (GBR) |
| 7141479-49 | Litton Systems Inc Guidance and Control Systems Div (USA) |
| VA-05-0322-090 | Leonardo Uk Ltd (GBR) |
| B78303 | Mbda Uk Ltd (GBR) |
| M39014/22-0794 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-C-39014/22 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MD015E104MAA | Kyocera Avx Components Corporation (USA) |
| 10128222 | Nimikkeistokeskus Ncb Finland (FIN) |
| 26577-42881 | Leonardo Mw Ltd (GBR) |
NSN 5910-01-146-1947 is a Capacitor,fixed,ceramic Dielectr, manufactured by Leonardo Uk Ltd, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-01-146-1947 has 9 cross-referenced part numbers: 26577-42881 (Leonardo Uk Ltd), 7141479-49 (Litton Systems Inc Guidance and Control Systems Div), VA-05-0322-090 (Leonardo Uk Ltd), B78303 (Mbda Uk Ltd), M39014/22-0794 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 4 more.
There is 1 known substitute for 5910-01-146-1947: 5910-01-171-8693. Verify interchangeability with system specifications before substitution.
Key specifications for 26577-42881: Test Data Document: 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Body Length: 0.092 INCHES NOMINAL IN; Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius: -30.0 TO 30.0 SINGLE SECTION; Body Width: 0.260 INCHES NOMINAL IN. 23 total characteristics are documented in the Federal Logistics Information System.