PartsTable TECHNICAL DATA SHEET
NSN 5910-01-139-4383Government record, cited

Capacitor, Fixed, Electrolytic5910-01-139-4383

NSN 5910-01-139-4383 · NIIN 011394383
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-139-4383 · 5910011394383 · NIIN 011394383 · 01-139-4383 · FSC 5910 Capacitors · M39018/05-0006 · DMS 85094 B · MIL-C-39018/5
Nearby stock numbers  ·
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Body Diameter: 1.375 INCHES NOMINAL IN
  • DC Leakage at Maximum Operating Temp: 4.0 MILLIAMPERES
  • Terminal Diameter: 0.190 INCHES NOMINAL IN
  • Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END
  • Tolerance Range Per Section: -0.00 TO 100.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
Identification
  • NSN: 5910-01-139-4383
  • NIIN: 011394383
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-139-4383, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-139-4383
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Body Diameter1.375 INCHES NOMINAL IN
DC Leakage at Maximum Operating Temp4.0 MILLIAMPERES
Terminal Diameter0.190 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES, TERMINAL(S) ON ONE END
Tolerance Range Per Section-0.00 TO 100.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length0.250 INCHES NOMINAL IN
Electrical PolarizationPOLARIZED
Center to Center Distance Between Terminals Parallel to Diameter0.562 INCHES NOMINAL IN
Equivalent Series Resistance at Reference Temp in Ohms0.027
Nonderated Continuous Voltage Rating and Type Per Section7.5 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Case Insulation MaterialPLASTIC
Impedance at Minimum Operating Temp in Ohms0.012
Specification/standard Data81349-MIL-C-39018/5 GOVERNMENT SPECIFICATION
Body Length4.125 INCHES NOMINAL IN
Capacitance Value Per Section6800.000 MICROFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Capacitive Electrode MaterialALUMINUM
Test Data Document81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity2 THREADED HOLE
DC Leakage at Reference Temp0.400 MILLIAMPERES
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5910-01-159-2578 POSSIBLE MATCH
CAPACITOR,FIXED,ELECTROLYTIC
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
M39018/05-0006 2/2 Government specification standardization
U.S. Government activity
DMS 85094 B 5/9 Secondary reference
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
MIL-C-39018/5 4/1 Identification reference
U.S. Government activity
Related Parts
5910-01-159-2578POSSIBLE MATCH
CAPACITOR,FIXED,ELECTROLYTIC

Frequently Asked Questions

What is NSN 5910-01-139-4383?

NSN 5910-01-139-4383 is a Capacitor,fixed,electrolytic, classified under FSC 5910, Capacitors. Status: active.

What NSN replaces 5910-01-139-4383?

1 possible match (shared part number, not a government interchangeability claim): 5910-01-159-2578. Verify interchangeability with system specifications before substitution.

What are the specifications of 5910-01-139-4383?

Key specifications for 5910-01-139-4383: Body Diameter: 1.375 INCHES NOMINAL IN; DC Leakage at Maximum Operating Temp: 4.0 MILLIAMPERES; Terminal Diameter: 0.190 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-139-4383 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com