The Capacitor,fixed,plastic Dielectr, cataloged under National Stock Number 5910-01-129-3980, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is American Shizuki Corp. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-129-3980 |
| Primary Part Number | 663F39451W |
| Item Name | Capacitor,fixed,plastic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | American Shizuki Corp |
| Status | ACTIVE |
| Body Style | W/O MTG FACILITIES, AXIAL TERMINALS |
| Terminal Diameter | 0.032 INCHES NOMINAL IN |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Capacitance Value Per Section | 0.390 MICROFARADS SINGLE SECTION |
| Terminal Length | 1.625 INCHES MINIMUM IN |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC |
| Body Length | 1.188 INCHES NOMINAL IN |
| Tolerance Range Per Section | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| Specification/standard Data | 81349-MIL-C-55514/1 GOVERNMENT SPECIFICATION |
| Body Diameter | 0.485 INCHES NOMINAL IN |
| Insulation Resistance at Maximum Operating Temp | 5000.0 MEGOHM-MICROFARADS |
| Nonderated Continuous Voltage Rating and Type Per Section | 100.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Internal Electrical Connection Type | EXTENDED FOIL |
| Test Data Document | 81349-MIL-C-55514 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Surface Treatment | SOLDER |
| Insulation Resistance at Reference Temp | 50000.0 MEGOHM-MICROFARADS |
| Dissipation Factor at Reference Temp in Percent | 0.5000 |
| Material | PLASTIC CASE |
| Dielectric Material | PLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER) |
| Reliability Indicator | ESTABLISHED |
| Reliability Failure Rate Level in Percent | 1.0000 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 663F39451W | American Shizuki Corp (USA) |
| MIL-C-55514/1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-55514/1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 1000038-00 | Compaq Federal Llc (USA) |
| 10-00038-00 | Compaq Federal Llc (USA) |
| CFR02AMB394JM | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-01-129-3980 is a Capacitor,fixed,plastic Dielectr, manufactured by American Shizuki Corp, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-01-129-3980 has 6 cross-referenced part numbers: 663F39451W (American Shizuki Corp), MIL-C-55514/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-55514/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 1000038-00 (Compaq Federal Llc), 10-00038-00 (Compaq Federal Llc) and 1 more.
There are 2 known substitutes for 5910-01-129-3980: 5910-00-068-4570, 6685-00-228-3784. Verify interchangeability with system specifications before substitution.
Key specifications for 663F39451W: Body Style: W/O MTG FACILITIES, AXIAL TERMINALS; Terminal Diameter: 0.032 INCHES NOMINAL IN; Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD; Capacitance Value Per Section: 0.390 MICROFARADS SINGLE SECTION. 22 total characteristics are documented in the Federal Logistics Information System.