The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-129-3218, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-129-3218 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 90.0 SINGLE SECTION |
| Body Style | CHIP TYPE |
| Tolerance Range Per Section | -0.10 TO 0.10 PICOFARADS SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SILVER OR PALLADIUM |
| Terminal Length | 0.015 INCHES NOMINAL IN |
| Body Width | 0.110 INCHES NOMINAL IN |
| Body Height | 0.058 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN |
| Reliability Failure Rate Level in Percent | 1.0000 |
| Nonderated Continuous Voltage Rating and Type Per Section | 500.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-55681/4 GOVERNMENT SPECIFICATION |
| Body Length | 0.110 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 0.0500 |
| Capacitance Value Per Section | 1.800 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 100000.0 MEGOHMS |
| Precious Material and Location | TERMINAL SURFACES PALLADIUM AND TERMINAL SURFACES SILVER |
| Test Data Document | 81349-MIL-C-55681 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | CERAMIC OR GLASS CASE |
| Terminal Type and Quantity | 2 BONDING PAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.080 INCHES NOMINAL IN |
| Insulation Resistance at Reference Temp | 1000000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| ATC175B1R8BP500X | C/1 Advisory reference — outside the item-of-supply concept American Technical Ceramics Corp Dba Atc |
| 914-3502-010 | C/1 Advisory reference — outside the item-of-supply concept Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems |
| MIL-C-55681/4 | 4/1 Identification reference U.S. Government activity |
| CDR13BG1R8EBMM | 2/2 Government specification standardization U.S. Government activity |
NSN 5910-01-129-3218 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5910-01-256-5060. Verify interchangeability with system specifications before substitution.
Key specifications for 5910-01-129-3218: Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 90.0 SINGLE SECTION; Body Style: CHIP TYPE; Tolerance Range Per Section: -0.10 TO 0.10 PICOFARADS SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC. 24 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.