The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-117-1468, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 18 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-117-1468 |
| Primary Part Number | MIL-C-39014/5 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Terminal Diameter | 0.027 INCHES MAXIMUM IN |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Test Data Document | 81349-MIL-C-39014/5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Nonderated Continuous Voltage Rating and Type Per Section | 100.0 DC SINGLE SECTION |
| Dissipation Factor at Reference Temp in Percent | 2.5000 |
| Material | PLASTIC CASE |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Reliability Failure Rate Level in Percent | 1.0000 |
| Body Diameter | 0.090 INCHES NOMINAL IN |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Voltage Temp Limits Per Section in Percent Capacitance Change | -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION |
| Body Length | 0.160 INCHES NOMINAL IN |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Capacitance Value Per Section | 1000.000 PICOFARADS SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Reliability Indicator | ESTABLISHED |
| Terminal Length | 1.500 INCHES MINIMUM IN |
| Body Style | W/O MTG FACILITIES, AXIAL TERMINALS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-C-39014/5 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M39014-05-2638 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-01-117-1468 is a Capacitor,fixed,ceramic Dielectr, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-01-117-1468 has 2 cross-referenced part numbers: MIL-C-39014/5 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M39014-05-2638 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5910-01-117-1468: 5910-00-098-9281. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-C-39014/5: Terminal Diameter: 0.027 INCHES MAXIMUM IN; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION; Test Data Document: 81349-MIL-C-39014/5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Nonderated Continuous Voltage Rating and Type Per Section: 100.0 DC SINGLE SECTION. 18 total characteristics are documented in the Federal Logistics Information System.