PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

210655Capacitor,fixed,mica Dielectric

Conrac Systems Inc · NSN 5910-01-112-9195 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-01-112-9195 — this item is cataloged by the U.S. Government under National Stock Number 5910-01-112-9195. Primary manufacturer part number: 210655.
Features
  • Capacitor,fixed,mica Dielectric — FSC 5910
  • Tolerance Range Per Section: -5.00 TO 5.00 PERCENT SINGLE SECTION
  • Body Length: 0.480 INCHES MAXIMUM IN
  • Body Width: 0.400 INCHES MAXIMUM IN
  • Terminal Diameter: 0.025 INCHES NOMINAL IN
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
  • Capacitance Value Per Section: 1000.000 PICOFARADS SINGLE SECTION
  • Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S)
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
  • Applications requiring Plastic Case construction
General Description

The Capacitor,fixed,mica Dielectric, cataloged under National Stock Number 5910-01-112-9195, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Conrac Systems Inc. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-112-9195
Primary Part Number210655
Item NameCapacitor,fixed,mica Dielectric
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerConrac Systems Inc
StatusACTIVE
Tolerance Range Per Section-5.00 TO 5.00 PERCENT SINGLE SECTION
Body Length0.480 INCHES MAXIMUM IN
Body Width0.400 INCHES MAXIMUM IN
Terminal Diameter0.025 INCHES NOMINAL IN
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Capacitance Value Per Section1000.000 PICOFARADS SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Terminal Length1.000 INCHES MINIMUM IN
Nonderated Continuous Voltage Rating and Type Per Section100.0 DC SINGLE SECTION
Temp Coefficient of Capacitance Range Per Section in Ppm Per Deg Celsius+0.0 TO 70.0 SINGLE SECTION
Center to Center Distance Between Terminals Parallel to Length0.194 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
Body Height0.230 INCHES MAXIMUM IN
Insulation Resistance at Reference Temp10000.0 MEGOHMS
Dissipation Factor at Reference Temp in Percent0.200
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
MaterialPLASTIC CASE
Terminal Surface TreatmentSOLDER
Reliability IndicatorNOT ESTABLISHED
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 2
4730-00-164-06977765 INTERCHANGEABLE
Tee,tube
Danfoss Power Solutions II, Llc
5950-01-023-8319 INTERCHANGEABLE
Coil,electrical
Cross-Reference Index
Part NumberManufacturer
210655 Conrac Systems Inc (USA)
Related Parts
4730-00-164-0697INTERCHANGEABLE
TEE,TUBE
7765
5950-01-023-8319INTERCHANGEABLE
COIL,ELECTRICAL

Frequently Asked Questions

What is NSN 5910-01-112-9195?

NSN 5910-01-112-9195 is a Capacitor,fixed,mica Dielectric, manufactured by Conrac Systems Inc, classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-01-112-9195?

NSN 5910-01-112-9195 has 1 cross-referenced part number: 210655 (Conrac Systems Inc).

What NSN replaces 5910-01-112-9195?

There are 2 known substitutes for 5910-01-112-9195: 4730-00-164-0697, 5950-01-023-8319. Verify interchangeability with system specifications before substitution.

What are the specifications of 210655?

Key specifications for 210655: Tolerance Range Per Section: -5.00 TO 5.00 PERCENT SINGLE SECTION; Body Length: 0.480 INCHES MAXIMUM IN; Body Width: 0.400 INCHES MAXIMUM IN; Terminal Diameter: 0.025 INCHES NOMINAL IN. 19 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com