PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

MIL-C-39006/9Capacitor,fixed,electrolytic

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M · NSN 5910-01-111-5206 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-01-111-5206 — this item is cataloged by the U.S. Government under National Stock Number 5910-01-111-5206. Primary manufacturer part number: MIL-C-39006/9.
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Capacitance Value Per Section: 540.000 MICROFARADS SINGLE SECTION
  • Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION
  • Reliability Failure Rate Level in Percent: 1.0000
  • Case Insulation Material: PLASTIC
  • Capacitive Electrode Material: TANTALUM
  • Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD
  • DC Leakage at Reference Temp: 6.000 MICROAMPERES
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-111-5206, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-111-5206
Primary Part NumberMIL-C-39006/9
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerMilitary Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
StatusACTIVE
Capacitance Value Per Section540.000 MICROFARADS SINGLE SECTION
Tolerance Range Per Section-20.00 TO 20.00 PERCENT SINGLE SECTION
Reliability Failure Rate Level in Percent1.0000
Case Insulation MaterialPLASTIC
Capacitive Electrode MaterialTANTALUM
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
DC Leakage at Reference Temp6.000 MICROAMPERES
Dissipation Factor at Reference Temp in Percent49.0000
Test Data Document81349-MIL-C-39006/9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Length2.250 INCHES NOMINAL IN
Electrical PolarizationPOLARIZED
Body Length1.062 INCHES NOMINAL IN
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Reliability IndicatorESTABLISHED
Nonderated Continuous Voltage Rating and Type Per Section15.0 DC SINGLE SECTION
Features ProvidedHERMETICALLY SEALED CASE
Schematic Diagram DesignatorELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
Body StyleW/O MTG FACILITIES, AXIAL TERMINALS
Terminal Diameter0.025 INCHES NOMINAL IN
Body Diameter0.375 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 1
5910-01-119-4308 INTERCHANGEABLE
Capacitor,fixed,electrolytic
Cross-Reference Index
Part NumberManufacturer
MIL-C-39006/9 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
M39006-09-8278 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Related Parts
5910-01-119-4308INTERCHANGEABLE
CAPACITOR,FIXED,ELECTROLYTIC

Frequently Asked Questions

What is NSN 5910-01-111-5206?

NSN 5910-01-111-5206 is a Capacitor,fixed,electrolytic, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-01-111-5206?

NSN 5910-01-111-5206 has 2 cross-referenced part numbers: MIL-C-39006/9 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M39006-09-8278 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).

What NSN replaces 5910-01-111-5206?

There is 1 known substitute for 5910-01-111-5206: 5910-01-119-4308. Verify interchangeability with system specifications before substitution.

What are the specifications of MIL-C-39006/9?

Key specifications for MIL-C-39006/9: Capacitance Value Per Section: 540.000 MICROFARADS SINGLE SECTION; Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION; Reliability Failure Rate Level in Percent: 1.0000; Case Insulation Material: PLASTIC. 20 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com