PartsTable TECHNICAL DATA SHEET
NSN 5910-01-105-5088Government record, cited

Capacitor, Fixed, Electrolytic5910-01-105-5088

NSN 5910-01-105-5088 · NIIN 011055088
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-105-5088 · 5910011055088 · NIIN 011055088 · 01-105-5088 · FSC 5910 Capacitors · 568-129112-001 · 129-117
Nearby stock numbers  ·
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Body Diameter: 0.119 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
  • Terminal Diameter: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
  • Body Style: W/O MTG FACILITIES, AXIAL TERMINALS
  • Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -80.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 1.250 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
Identification
  • NSN: 5910-01-105-5088
  • NIIN: 011055088
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-105-5088, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-105-5088
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Body Diameter0.119 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
Terminal Diameter0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
Body StyleW/O MTG FACILITIES, AXIAL TERMINALS
Tolerance Range Per Section-10.00 TO 10.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-80.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length1.250 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
Electrical PolarizationPOLARIZED
Anode TypeSOLID
Nonderated Continuous Voltage Rating and Type Per Section35.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Case Insulation MaterialPLASTIC
Body Length0.255 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
Capacitance Value Per Section1.000 MICROFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Capacitive Electrode MaterialTANTALUM
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
1430-01-708-3470129117 POSSIBLE MATCH
GUIDED MISSILE BATTERY CONTROL C
Possible match (shared part number)Naval Surface Warfare Center Dahlgren Div
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
568-129112-001 3/9 Design control — primary reference
Xes Inc Xerox Engineering Service
129-117 5/9 Secondary reference
Xes Inc Xerox Engineering Service
Related Parts
1430-01-708-3470POSSIBLE MATCH
GUIDED MISSILE BATTERY CONTROL C
129117

Frequently Asked Questions

What is NSN 5910-01-105-5088?

NSN 5910-01-105-5088 is a Capacitor,fixed,electrolytic, classified under FSC 5910, Capacitors. Status: active.

What NSN replaces 5910-01-105-5088?

1 possible match (shared part number, not a government interchangeability claim): 1430-01-708-3470. Verify interchangeability with system specifications before substitution.

What are the specifications of 5910-01-105-5088?

Key specifications for 5910-01-105-5088: Body Diameter: 0.119 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN; Terminal Diameter: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN; Body Style: W/O MTG FACILITIES, AXIAL TERMINALS; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-105-5088 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com