PartsTable TECHNICAL DATA SHEET
NSN 5910-01-097-7207Government record, cited

Capacitor, Fixed, Ceramic Dielectr5910-01-097-7207

NSN 5910-01-097-7207 · NIIN 010977207
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-097-7207 · 5910010977207 · NIIN 010977207 · 01-097-7207 · FSC 5910 Capacitors · 8111A100R2G220K · 8111A100R2G220G · 8111A100R2G220G · 8111A100R2G220J · RW79U7500F
Nearby stock numbers  ·
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Terminal Diameter: 0.016 INCHES NOMINAL IN
  • Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: -220.0 SINGLE SECTION
  • Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
  • Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 1.500 INCHES MINIMUM IN
Identification
  • NSN: 5910-01-097-7207
  • NIIN: 010977207
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-097-7207, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-097-7207
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Terminal Diameter0.016 INCHES NOMINAL IN
Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius-220.0 SINGLE SECTION
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Tolerance Range Per Section-2.00 TO 2.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length1.500 INCHES MINIMUM IN
Quality Factor at Reference Temp1000.0000
Body Width0.150 INCHES MAXIMUM IN
Body Height0.100 INCHES MAXIMUM IN
Nonderated Continuous Voltage Rating and Type Per Section100.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Body Length0.150 INCHES MAXIMUM IN
Capacitance Value Per Section22.000 PICOFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
MaterialPLASTIC CASE
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius-30.0 TO 30.0 SINGLE SECTION
Center to Center Distance Between Terminals Parallel to Length0.100 INCHES NOMINAL IN
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
8111A100R2G220K C/1 Advisory reference — outside the item-of-supply concept
Erie Specialty Products Inc
8111A100R2G220G 5/9 Secondary reference
Erie Specialty Products Inc
8111A100R2G220G 3/9 Design control — primary reference
Murata Erie North America Inc State College Opns
8111A100R2G220J C/1 Advisory reference — outside the item-of-supply concept
Erie Specialty Products Inc
RW79U7500F C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity

Frequently Asked Questions

What is NSN 5910-01-097-7207?

NSN 5910-01-097-7207 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-01-097-7207?

Key specifications for 5910-01-097-7207: Terminal Diameter: 0.016 INCHES NOMINAL IN; Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: -220.0 SINGLE SECTION; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-097-7207 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com