PartsTable TECHNICAL DATA SHEET
NSN 5910-01-087-4841Government record, cited

Capacitor, Fixed, Mica Dielectric5910-01-087-4841

NSN 5910-01-087-4841 · NIIN 010874841
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-087-4841 · 5910010874841 · NIIN 010874841 · 01-087-4841 · FSC 5910 Capacitors · CMR05C7R0DPDM · MIL-C-39001/5
Nearby stock numbers  ·
Features
  • Capacitor,fixed,mica Dielectric — FSC 5910
  • Center to Center Distance Between Terminals Parallel to Width: 0.225 INCHES NOMINAL IN
  • Terminal Diameter: 0.025 INCHES NOMINAL IN
  • Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
  • Tolerance Range Per Section: -0.50 TO 0.50 PICOFARADS SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
  • Terminal Length: 1.000 INCHES MINIMUM IN
  • Body Width: 0.360 INCHES MAXIMUM IN
Identification
  • NSN: 5910-01-087-4841
  • NIIN: 010874841
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,mica Dielectric, cataloged under National Stock Number 5910-01-087-4841, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-087-4841
Item NameCapacitor,fixed,mica Dielectric
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Center to Center Distance Between Terminals Parallel to Width0.225 INCHES NOMINAL IN
Terminal Diameter0.025 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Tolerance Range Per Section-0.50 TO 0.50 PICOFARADS SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
Terminal Length1.000 INCHES MINIMUM IN
Body Width0.360 INCHES MAXIMUM IN
Body Height0.170 INCHES MAXIMUM IN
Temp Coefficient of Capacitance Range Per Section in Ppm Per Deg Celsius-200.0 TO 200.0 SINGLE SECTION
Reliability Failure Rate Level in Percent1.0000
Nonderated Continuous Voltage Rating and Type Per Section500.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Body Length0.450 INCHES MAXIMUM IN
Capacitance Value Per Section7.000 PICOFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Test Data Document81349-MIL-C-39001/5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialPLASTIC CASE
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
CMR05C7R0DPDM 2/2 Government specification standardization
U.S. Government activity
MIL-C-39001/5 4/1 Identification reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5910-01-087-4841?

NSN 5910-01-087-4841 is a Capacitor,fixed,mica Dielectric, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-01-087-4841?

Key specifications for 5910-01-087-4841: Center to Center Distance Between Terminals Parallel to Width: 0.225 INCHES NOMINAL IN; Terminal Diameter: 0.025 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -0.50 TO 0.50 PICOFARADS SINGLE SECTION. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-087-4841 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com