The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-086-9302, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Hensoldt Sensors Gmbh Div Seps. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-086-9302 |
| Primary Part Number | 5M.5224.224.75 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Hensoldt Sensors Gmbh Div Seps |
| Status | ACTIVE |
| Center to Center Distance Between Terminals Parallel to Width | 0.100 INCHES NOMINAL IN |
| Terminal Diameter | 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Quality Factor at Reference Temp | 1000.0000 |
| Body Width | 0.190 INCHES NOMINAL IN |
| Body Height | 0.090 INCHES NOMINAL IN |
| Reliability Failure Rate Level in Percent | 1.0000 |
| Nonderated Continuous Voltage Rating and Type Per Section | 100.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Body Length | 0.190 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 0.1500 |
| Capacitance Value Per Section | 470.000 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Test Data Document | 81349-MIL-C-20/35 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | PLASTIC CASE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -120.0 TO 120.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.200 INCHES NOMINAL IN |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 5M.5224.224.75 | Hensoldt Sensors Gmbh Div Seps (DEU) |
| 4584819 | Rohde & Schwarz Gmbh & Co. Kommanditgesellschaft Dba R & S (DEU) |
| Reference | Meaning |
|---|---|
| CCR05CG471JM | 2/2 Government specification standardization U.S. Government activity |
| 913-3673-010 | 5/2 Secondary reference U.S. Government activity |
| MIL-C-20/35 | 4/1 Identification reference U.S. Government activity |
| 10138610 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
NSN 5910-01-086-9302 is a Capacitor,fixed,ceramic Dielectr, manufactured by Hensoldt Sensors Gmbh Div Seps, classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-086-9302 has 2 manufacturer part numbers on file: 5M.5224.224.75 (Hensoldt Sensors Gmbh Div Seps), 4584819 (Rohde & Schwarz Gmbh & Co. Kommanditgesellschaft Dba R & S).
Key specifications for 5M.5224.224.75: Center to Center Distance Between Terminals Parallel to Width: 0.100 INCHES NOMINAL IN; Terminal Diameter: 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -5.00 TO 5.00 PERCENT SINGLE SECTION. 22 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.