PartsTable TECHNICAL DATA SHEET
NSN 5910-01-080-1515Government record, cited

Capacitor, Fixed, Mica Dielectric5910-01-080-1515

NSN 5910-01-080-1515 · NIIN 010801515
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-080-1515 · 5910010801515 · NIIN 010801515 · 01-080-1515 · FSC 5910 Capacitors · CMR06F202FPDR · CMR06F202FPDM · MIL-PRF-39001/5 · DM19C202K05004CR · MIL-C-39001/5
Nearby stock numbers  ·
Features
  • Capacitor,fixed,mica Dielectric — FSC 5910
  • Terminal Diameter: 0.032 INCHES NOMINAL IN
  • Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
  • Tolerance Range Per Section: -1.00 TO 1.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 1.000 INCHES MINIMUM IN
  • Body Width: 0.530 INCHES MAXIMUM IN
Identification
  • NSN: 5910-01-080-1515
  • NIIN: 010801515
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,mica Dielectric, cataloged under National Stock Number 5910-01-080-1515, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-080-1515
Item NameCapacitor,fixed,mica Dielectric
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Terminal Diameter0.032 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Tolerance Range Per Section-1.00 TO 1.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length1.000 INCHES MINIMUM IN
Body Width0.530 INCHES MAXIMUM IN
Body Height0.130 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
Temp Coefficient of Capacitance Range Per Section in Ppm Per Deg Celsius+0.0 TO 70.0 SINGLE SECTION
Reliability Failure Rate Level in Percent0.0100
Nonderated Continuous Voltage Rating and Type Per Section500.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Specification/standard Data81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
Body Length0.580 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
Dissipation Factor at Reference Temp in Percent0.0015
Capacitance Value Per Section2000.000 PICOFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Insulation Resistance at Maximum Operating Temp5000.0 MEGOHMS
Test Data Document81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialPLASTIC CASE
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Center to Center Distance Between Terminals Parallel to Length0.350 INCHES NOMINAL IN
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
CMR06F202FPDR 2/2 Government specification standardization
U.S. Government activity
CMR06F202FPDM 5/9 Secondary reference
U.S. Government activity
MIL-PRF-39001/5 4/1 Identification reference
U.S. Government activity
DM19C202K05004CR C/1 Advisory reference — outside the item-of-supply concept
Electro Motive Corp Subsidiary of International Electronics Corp
MIL-C-39001/5 5/9 Secondary reference
U.S. Government activity
CMR06F202FPDP C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
32024C2001K0500 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
10138604 6/9 Informative reference only
Nimikkeistokeskus Ncb Finland

Frequently Asked Questions

What is NSN 5910-01-080-1515?

NSN 5910-01-080-1515 is a Capacitor,fixed,mica Dielectric, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-01-080-1515?

Key specifications for 5910-01-080-1515: Terminal Diameter: 0.032 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -1.00 TO 1.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-080-1515 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com