The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-075-6116, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Nimikkeistokeskus Ncb Finland. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-075-6116 |
| Primary Part Number | 10128186 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Nimikkeistokeskus Ncb Finland |
| Status | ACTIVE |
| Test Data Document | 81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Capacitance Value Per Section | 0.022 MICROFARADS SINGLE SECTION |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Material | PLASTIC CASE |
| Dissipation Factor at Reference Temp in Percent | 2.5000 |
| Insulation Resistance at Reference Temp | 51000.0 MEGOHMS |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Reliability Failure Rate Level in Percent | 0.1000 |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Body Width | 0.290 INCHES NOMINAL IN |
| Body Height | 0.090 INCHES NOMINAL IN |
| Center to Center Distance Between Terminals Parallel to Length | 0.200 INCHES NOMINAL IN |
| Reliability Indicator | ESTABLISHED |
| Nonderated Continuous Voltage Rating and Type Per Section | 50.0 DC SINGLE SECTION |
| Body Length | 0.290 INCHES NOMINAL IN |
| Voltage Temp Limits Per Section in Percent Capacitance Change | -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION |
| Terminal Diameter | 0.025 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 10128186 | Nimikkeistokeskus Ncb Finland (FIN) |
| M39014-02-1276 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-C-39014/2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| CKR06BX224KP | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-01-075-6116 is a Capacitor,fixed,ceramic Dielectr, manufactured by Nimikkeistokeskus Ncb Finland, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-01-075-6116 has 4 cross-referenced part numbers: 10128186 (Nimikkeistokeskus Ncb Finland), M39014-02-1276 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-C-39014/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CKR06BX224KP (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 2 known substitutes for 5910-01-075-6116: 5910-00-010-8718, 5910-00-113-5286. Verify interchangeability with system specifications before substitution.
Key specifications for 10128186: Test Data Document: 81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Capacitance Value Per Section: 0.022 MICROFARADS SINGLE SECTION; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION; Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD. 20 total characteristics are documented in the Federal Logistics Information System.