The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-073-5755, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 12 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-073-5755 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Terminal Diameter | 0.020 INCHES NOMINAL IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Body Width | 0.290 INCHES NOMINAL IN |
| Body Height | 0.090 INCHES NOMINAL IN |
| Reliability Failure Rate Level in Percent | 0.0100 |
| Nonderated Continuous Voltage Rating and Type Per Section | 100.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-20/36 GOVERNMENT SPECIFICATION |
| Body Length | 0.290 INCHES NOMINAL IN |
| Capacitance Value Per Section | 3300.000 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | PLASTIC CASE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.200 INCHES NOMINAL IN |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CN30A332J | C/1 Advisory reference — outside the item-of-supply concept Mepco/centralab a North American Philips Co |
| CCR06CG332GR | 2/2 Government specification standardization U.S. Government activity |
| CN30A332K245 | C/1 Advisory reference — outside the item-of-supply concept Mepco/centralab a North American Philips Co |
| CCR06CG332KM | 5/9 Secondary reference U.S. Government activity |
| MIL-C-20/36 | 4/1 Identification reference U.S. Government activity |
| 0061C0016-031 | C/1 Advisory reference — outside the item-of-supply concept Martin Marietta Technologies Inc Sub of Martin Marietta Corp Aero and Naval Systems |
| SM-B-650930 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR06CG332GM | 5/9 Secondary reference U.S. Government activity |
| CCR06CG332JP | 5/9 Secondary reference U.S. Government activity |
| CCR06CG32GR | 5/9 Secondary reference U.S. Government activity |
| CCR06CG332JM | 5/9 Secondary reference U.S. Government activity |
| MIL-C-0020/36 | 5/9 Secondary reference U.S. Government activity |
NSN 5910-01-073-5755 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5910-01-224-6159. Verify interchangeability with system specifications before substitution.
Key specifications for 5910-01-073-5755: Terminal Diameter: 0.020 INCHES NOMINAL IN; Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 0.0 SINGLE SECTION; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION. 23 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.