The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-073-0709, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Thales Deutschland Gmbh Div Customer Services. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-073-0709 |
| Primary Part Number | 42978 48156 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Thales Deutschland Gmbh Div Customer Services |
| Status | ACTIVE |
| Terminal Diameter | 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -0.25 TO 0.25 PICOFARADS SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Body Width | 0.190 INCHES NOMINAL IN |
| Body Height | 0.090 INCHES NOMINAL IN |
| Reliability Failure Rate Level in Percent | 0.0100 |
| Nonderated Continuous Voltage Rating and Type Per Section | 200.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION |
| Body Length | 0.190 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 0.1500 |
| Capacitance Value Per Section | 5.600 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | PLASTIC CASE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -60.0 TO 60.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.200 INCHES NOMINAL IN |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 42978 48156 | Thales Deutschland Gmbh Div Customer Services (DEU) |
| Reference | Meaning |
|---|---|
| CCR05CH5R6DR | 5/9 Secondary reference U.S. Government activity |
| CCR05CH5R6CR | 2/2 Government specification standardization U.S. Government activity |
| MIL-C-20/35 | 4/1 Identification reference U.S. Government activity |
| 012228037 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CH5R6DP | 5/9 Secondary reference U.S. Government activity |
NSN 5910-01-073-0709 is a Capacitor,fixed,ceramic Dielectr, manufactured by Thales Deutschland Gmbh Div Customer Services, classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-073-0709 has 1 manufacturer part number on file: 42978 48156 (Thales Deutschland Gmbh Div Customer Services).
2 possible matches (shared part number, not a government interchangeability claim): 5910-01-221-5247, 5910-01-221-8974. Verify interchangeability with system specifications before substitution.
Key specifications for 42978 48156: Terminal Diameter: 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN; Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 0.0 SINGLE SECTION; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -0.25 TO 0.25 PICOFARADS SINGLE SECTION. 24 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.