The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-071-1709, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Mepco/electra Inc. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 7 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-071-1709 |
| Primary Part Number | 2222-638-10399 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Mepco/electra Inc |
| Status | ACTIVE |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Specification/standard Data | 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION |
| Body Width | 0.190 INCHES NOMINAL IN |
| Center to Center Distance Between Terminals Parallel to Length | 0.200 INCHES NOMINAL IN |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Body Height | 0.090 INCHES NOMINAL IN |
| Capacitance Value Per Section | 39.000 PICOFARADS SINGLE SECTION |
| Tolerance Range Per Section | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| Terminal Diameter | 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN |
| Nonderated Continuous Voltage Rating and Type Per Section | 200.0 DC SINGLE SECTION |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Body Length | 0.190 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 0.1500 |
| Terminal Surface Treatment | SOLDER |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Material | PLASTIC CASE |
| Reliability Indicator | ESTABLISHED |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Reliability Failure Rate Level in Percent | 0.0100 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 2222-638-10399 | Mepco/electra Inc (USA) |
| CCR05CG390JP | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| CCR05CG390GM | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| CCR05CG390GR | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILC0020-35 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-C-20/35 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 352250026438 | Thales Nederland (NLD) |
NSN 5910-01-071-1709 is a Capacitor,fixed,ceramic Dielectr, manufactured by Mepco/electra Inc, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-01-071-1709 has 7 cross-referenced part numbers: 2222-638-10399 (Mepco/electra Inc), CCR05CG390JP (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CCR05CG390GM (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CCR05CG390GR (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MILC0020-35 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 2 more.
There is 1 known substitute for 5910-01-071-1709: 5910-01-177-4623. Verify interchangeability with system specifications before substitution.
Key specifications for 2222-638-10399: Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC; Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD; Test Data Document: 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius: -30.0 TO 30.0 SINGLE SECTION. 24 total characteristics are documented in the Federal Logistics Information System.