PartsTable TECHNICAL DATA SHEET
NSN 5910-01-071-0279Government record, cited

Capacitor, Fixed, Electrolytic5910-01-071-0279

NSN 5910-01-071-0279 · NIIN 010710279
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-071-0279 · 5910010710279 · NIIN 010710279 · 01-071-0279 · FSC 5910 Capacitors · M39006/19-1049 · MIL-C-39006/19 · MIL-PRF-39006/19
Nearby stock numbers  ·
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Body Diameter: 0.875 INCHES NOMINAL IN
  • DC Leakage at Maximum Operating Temp: 90.0 MICROAMPERES
  • Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END
  • Tolerance Range Per Section: -15.00 TO 75.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Length: 0.406 INCHES NOMINAL IN
  • Electrical Polarization: POLARIZED
Identification
  • NSN: 5910-01-071-0279
  • NIIN: 010710279
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-071-0279, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-071-0279
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Body Diameter0.875 INCHES NOMINAL IN
DC Leakage at Maximum Operating Temp90.0 MICROAMPERES
Body StyleW/O MTG FACILITIES, TERMINAL(S) ON ONE END
Tolerance Range Per Section-15.00 TO 75.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Length0.406 INCHES NOMINAL IN
Electrical PolarizationPOLARIZED
Anode TypeSOLID
Reliability Failure Rate Level in Percent0.1000
Features ProvidedHERMETICALLY SEALED CASE
Nonderated Continuous Voltage Rating and Type Per Section180.0 DC SINGLE SECTION
Schematic Diagram DesignatorELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
Specification/standard Data81349-MIL-C-39006/19 GOVERNMENT SPECIFICATION
Body Length1.300 INCHES NOMINAL IN
Dissipation Factor at Reference Temp in Percent10.0000
Capacitance Value Per Section25.000 MICROFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Capacitive Electrode MaterialTANTALUM
Test Data Document81349-MIL-C-39006 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity1 STANDOFF, SOLDER STUD AND 1 TAB, SOLDER LUG
DC Leakage at Reference Temp18.000 MICROAMPERES
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
M39006/19-1049 2/2 Government specification standardization
U.S. Government activity
MIL-C-39006/19 5/9 Secondary reference
U.S. Government activity
MIL-PRF-39006/19 4/1 Identification reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5910-01-071-0279?

NSN 5910-01-071-0279 is a Capacitor,fixed,electrolytic, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-01-071-0279?

Key specifications for 5910-01-071-0279: Body Diameter: 0.875 INCHES NOMINAL IN; DC Leakage at Maximum Operating Temp: 90.0 MICROAMPERES; Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END; Tolerance Range Per Section: -15.00 TO 75.00 PERCENT SINGLE SECTION. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-071-0279 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com