The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-067-0804, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-067-0804 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Body Diameter | 0.140 INCHES NOMINAL IN |
| Terminal Diameter | 0.015 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Body Style | W/O MTG FACILITIES, AXIAL TERMINALS |
| Tolerance Range Per Section | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Reliability Failure Rate Level in Percent | 0.0100 |
| Nonderated Continuous Voltage Rating and Type Per Section | 100.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-20/29 GOVERNMENT SPECIFICATION |
| Body Length | 0.390 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 0.1500 |
| Capacitance Value Per Section | 1500.000 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | PLASTIC CASE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CAC03C0G152J050DA | C/1 Advisory reference — outside the item-of-supply concept Avx Corp Raleigh Plant |
| CCR77CG152JM | 5/9 Secondary reference U.S. Government activity |
| MIL-C-20/29 | 4/1 Identification reference U.S. Government activity |
| MA405A152JHA | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR77CG152GR | 2/2 Government specification standardization U.S. Government activity |
| CCR77CG152JR | 5/9 Secondary reference U.S. Government activity |
| CKR14MSNP0152J | C/1 Advisory reference — outside the item-of-supply concept Insilco Corp Acic Div |
| 292CC0G152J050E | C/1 Advisory reference — outside the item-of-supply concept Sprague Electric Co World Hqs |
| C192G152J1G5CM | C/1 Advisory reference — outside the item-of-supply concept Kemet Electronics Corporation |
NSN 5910-01-067-0804 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5910-01-324-5825. Verify interchangeability with system specifications before substitution.
Key specifications for 5910-01-067-0804: Body Diameter: 0.140 INCHES NOMINAL IN; Terminal Diameter: 0.015 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN; Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 0.0 SINGLE SECTION; Body Style: W/O MTG FACILITIES, AXIAL TERMINALS. 22 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.