PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

M39014-02-1318Capacitor,fixed,ceramic Dielectr

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M · NSN 5910-01-043-0581 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-01-043-0581 — this item is cataloged by the U.S. Government under National Stock Number 5910-01-043-0581. Primary manufacturer part number: M39014-02-1318.
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Capacitance Value Per Section: 0.330 MICROFARADS SINGLE SECTION
  • Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION
  • Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S)
  • Test Data Document: 81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • Body Height: 0.090 INCHES NOMINAL IN
  • Material: PLASTIC CASE
  • Insulation Resistance at Reference Temp: 100000.0 MEGOHMS
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
  • Applications requiring Plastic Case construction
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-043-0581, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 18 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-043-0581
Primary Part NumberM39014-02-1318
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerMilitary Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
StatusACTIVE
Capacitance Value Per Section0.330 MICROFARADS SINGLE SECTION
Tolerance Range Per Section-10.00 TO 10.00 PERCENT SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Test Data Document81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Body Height0.090 INCHES NOMINAL IN
MaterialPLASTIC CASE
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Dissipation Factor at Reference Temp in Percent2.5000
Terminal Length1.250 INCHES MINIMUM IN
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Voltage Temp Limits Per Section in Percent Capacitance Change-25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
Reliability Failure Rate Level in Percent0.0100
Reliability IndicatorESTABLISHED
Nonderated Continuous Voltage Rating and Type Per Section50.0 DC SINGLE SECTION
Body Width0.290 INCHES NOMINAL IN
Body Length0.290 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 1
5910-00-113-5284 INTERCHANGEABLE
Capacitor,fixed,ceramic Dielectr
Cross-Reference Index
Part NumberManufacturer
M39014-02-1318 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
MIL-C-39014/2 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
CC0920954 Rohde & Schwarz Gmbh & Co. Kommanditgesellschaft Dba R & S (DEU)
Related Parts
5910-00-113-5284INTERCHANGEABLE
CAPACITOR,FIXED,CERAMIC DIELECTR

Frequently Asked Questions

What is NSN 5910-01-043-0581?

NSN 5910-01-043-0581 is a Capacitor,fixed,ceramic Dielectr, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-01-043-0581?

NSN 5910-01-043-0581 has 3 cross-referenced part numbers: M39014-02-1318 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-C-39014/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CC0920954 (Rohde & Schwarz Gmbh & Co. Kommanditgesellschaft Dba R & S).

What NSN replaces 5910-01-043-0581?

There is 1 known substitute for 5910-01-043-0581: 5910-00-113-5284. Verify interchangeability with system specifications before substitution.

What are the specifications of M39014-02-1318?

Key specifications for M39014-02-1318: Capacitance Value Per Section: 0.330 MICROFARADS SINGLE SECTION; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION; Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S); Test Data Document: 81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).. 18 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com