PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

M39014-02-1405Capacitor,fixed,ceramic Dielectr

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M · NSN 5910-01-041-9162 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-01-041-9162 — this item is cataloged by the U.S. Government under National Stock Number 5910-01-041-9162. Primary manufacturer part number: M39014-02-1405.
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Voltage Temp Limits Per Section in Percent Capacitance Change: -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
  • Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S)
  • Test Data Document: 81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
  • Body Height: 0.090 INCHES NOMINAL IN
  • Dissipation Factor at Reference Temp in Percent: 2.5000
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
  • Applications requiring Plastic Case construction
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-041-9162, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-041-9162
Primary Part NumberM39014-02-1405
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerMilitary Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
StatusACTIVE
Voltage Temp Limits Per Section in Percent Capacitance Change-25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Test Data Document81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Body Height0.090 INCHES NOMINAL IN
Dissipation Factor at Reference Temp in Percent2.5000
Insulation Resistance at Reference Temp100000.0 MEGOHMS
MaterialPLASTIC CASE
Reliability Failure Rate Level in Percent1.0000
Capacitance Value Per Section0.680 MICROFARADS SINGLE SECTION
Body Width0.290 INCHES NOMINAL IN
Terminal Length1.250 INCHES MINIMUM IN
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Tolerance Range Per Section-10.00 TO 10.00 PERCENT SINGLE SECTION
Reliability IndicatorESTABLISHED
Nonderated Continuous Voltage Rating and Type Per Section50.0 DC SINGLE SECTION
Body Length0.290 INCHES NOMINAL IN
Center to Center Distance Between Terminals Parallel to Length0.200 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 1
5910-00-113-9453 INTERCHANGEABLE
Capacitor,fixed,ceramic Dielectr
Cross-Reference Index
Part NumberManufacturer
M39014-02-1405 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
MIL-C-39014/2 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
538137-405 Raytheon Company Dba Raytheon (USA)
Related Parts
5910-00-113-9453INTERCHANGEABLE
CAPACITOR,FIXED,CERAMIC DIELECTR

Frequently Asked Questions

What is NSN 5910-01-041-9162?

NSN 5910-01-041-9162 is a Capacitor,fixed,ceramic Dielectr, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-01-041-9162?

NSN 5910-01-041-9162 has 3 cross-referenced part numbers: M39014-02-1405 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-C-39014/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 538137-405 (Raytheon Company Dba Raytheon).

What NSN replaces 5910-01-041-9162?

There is 1 known substitute for 5910-01-041-9162: 5910-00-113-9453. Verify interchangeability with system specifications before substitution.

What are the specifications of M39014-02-1405?

Key specifications for M39014-02-1405: Voltage Temp Limits Per Section in Percent Capacitance Change: -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION; Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S); Test Data Document: 81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD. 19 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com