PartsTable TECHNICAL DATA SHEET
NSN 5910-01-017-4914Government record, cited

Capacitor, Fixed, Mica Dielectric5910-01-017-4914

NSN 5910-01-017-4914 · NIIN 010174914
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-017-4914 · 5910010174914 · NIIN 010174914 · 01-017-4914 · FSC 5910 Capacitors · CMR04F101GODP · HR905527-627B · MILC0039001-5 · CMR04F101J0DL · CMR04F101J0DM
Nearby stock numbers  ·
Features
  • Capacitor,fixed,mica Dielectric — FSC 5910
  • Terminal Diameter: 0.016 INCHES NOMINAL IN
  • Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
  • Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 1.000 INCHES MINIMUM IN
  • Body Width: 0.350 INCHES MAXIMUM IN
Identification
  • NSN: 5910-01-017-4914
  • NIIN: 010174914
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,mica Dielectric, cataloged under National Stock Number 5910-01-017-4914, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-017-4914
Item NameCapacitor,fixed,mica Dielectric
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Terminal Diameter0.016 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Tolerance Range Per Section-2.00 TO 2.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length1.000 INCHES MINIMUM IN
Body Width0.350 INCHES MAXIMUM IN
Body Height0.110 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
Temp Coefficient of Capacitance Range Per Section in Ppm Per Deg Celsius+0.0 TO 70.0 SINGLE SECTION
Reliability Failure Rate Level in Percent0.1000
Nonderated Continuous Voltage Rating and Type Per Section500.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Specification/standard Data81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
Body Length0.300 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
Dissipation Factor at Reference Temp in Percent0.0008
Capacitance Value Per Section100.000 PICOFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Insulation Resistance at Maximum Operating Temp10000.0 MEGOHMS
Test Data Document81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialPLASTIC CASE
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Center to Center Distance Between Terminals Parallel to Length0.150 INCHES NOMINAL IN
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5910-01-041-6291 POSSIBLE MATCH
CAPACITOR,FIXED,MICA DIELECTRIC
Possible match (shared part number)
5910-01-258-5762 POSSIBLE MATCH
CAPACITOR,FIXED,MICA DIELECTRIC
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
CMR04F101GODP 2/2 Government specification standardization
U.S. Government activity
HR905527-627B C/1 Advisory reference — outside the item-of-supply concept
Electro Motive Corp Subsidiary of International Electronics Corp
MILC0039001-5 4/1 Identification reference
U.S. Government activity
CMR04F101J0DL 5/9 Secondary reference
U.S. Government activity
CMR04F101J0DM 5/9 Secondary reference
U.S. Government activity
HR905527+627B C/1 Advisory reference — outside the item-of-supply concept
Electro Motive Corp Subsidiary of International Electronics Corp
Related Parts
5910-01-041-6291POSSIBLE MATCH
CAPACITOR,FIXED,MICA DIELECTRIC
5910-01-258-5762POSSIBLE MATCH
CAPACITOR,FIXED,MICA DIELECTRIC

Frequently Asked Questions

What is NSN 5910-01-017-4914?

NSN 5910-01-017-4914 is a Capacitor,fixed,mica Dielectric, classified under FSC 5910, Capacitors. Status: active.

What NSN replaces 5910-01-017-4914?

2 possible matches (shared part number, not a government interchangeability claim): 5910-01-041-6291, 5910-01-258-5762. Verify interchangeability with system specifications before substitution.

What are the specifications of 5910-01-017-4914?

Key specifications for 5910-01-017-4914: Terminal Diameter: 0.016 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-017-4914 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com