PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

22-3608Capacitor,fixed,ceramic Dielectr

Zenith Electronics Corporation · NSN 5910-00-817-4723 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-00-817-4723 — this item is cataloged by the U.S. Government under National Stock Number 5910-00-817-4723. Primary manufacturer part number: 22-3608.
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius: -120.0 TO 120.0 SINGLE SECTION
  • Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION
  • Center to Center Distance Between Terminals Parallel to Diameter: 0.190 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
  • Body Diameter: 0.350 INCHES NOMINAL IN
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
  • Capacitance Value Per Section: 69.000 PICOFARADS SINGLE SECTION
  • Insulation Resistance at Maximum Operating Temp: 1000.0 MEGOHMS
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
  • Applications requiring Ceramic Case construction
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-00-817-4723, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Zenith Electronics Corporation. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 14 commercial cross-references from 11 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.

Technical Specifications
ParameterValue
NSN5910-00-817-4723
Primary Part Number22-3608
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerZenith Electronics Corporation
StatusCANCELLED
Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius-120.0 TO 120.0 SINGLE SECTION
Tolerance Range Per Section-2.00 TO 2.00 PERCENT SINGLE SECTION
Center to Center Distance Between Terminals Parallel to Diameter0.190 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
Body Diameter0.350 INCHES NOMINAL IN
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Capacitance Value Per Section69.000 PICOFARADS SINGLE SECTION
Insulation Resistance at Maximum Operating Temp1000.0 MEGOHMS
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius0.0 SINGLE SECTION
Test Data Document81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Body Length0.120 INCHES NOMINAL IN
Terminal Length1.250 INCHES MINIMUM IN
Nonderated Continuous Voltage Rating and Type Per Section500.0 DC SINGLE SECTION
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Terminal Surface TreatmentSOLDER
MaterialCERAMIC CASE
Insulation Resistance at Reference Temp50000.0 MEGOHMS
Quality Factor at Reference Temp1000.0000
Reliability IndicatorNOT ESTABLISHED
Body StyleW/O MTG FACILITIES, RADIAL TERMINALS
Lifecycle & Compliance
Acquisition StatusCANCELLED
HAZMATNo
Verified Substitutes 3
5895-00-349-3850A-577 INTERCHANGEABLE
Body,primer
Essex Industries, Inc. Dba Essex Industries
5310-00-639-0274A2894 INTERCHANGEABLE
Washer,flat
Aerocontrolex Group, Inc. Div Talley Actuators
1560-00-975-1474A289-4 INTERCHANGEABLE
Strut Assembly,door
Marathonnorco Aerospace, Inc.
Cross-Reference Index
Part NumberManufacturer
22-3608 Zenith Electronics Corporation (USA)
68U2J680J Maida Development Co (USA)
801-020U2J0-680G Erie Specialty Products Inc (USA)
1510-10-3680 Wavetek Rf Products, Inc (USA)
B95011J0258B100 Hensoldt Sensors Gmbh (DEU)
CC51UJ680G Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
A2894 Aeronautical Communications Equipment Inc (USA)
0851000U2J0 680 Murata Erie North America Inc State College Opns (USA)
0801020U2J0 680G Murata Erie North America Inc State College Opns (USA)
0851000U2J0 680 Murata Erie North America Inc Headquarters and Georgia Opns (USA)
1510-10-3680 Wavetek U S Inc Div of Wavetek Corp (USA)
MIL-C-20/17 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
851000U2J0680J Erie Specialty Products Inc (USA)
851-000U2J0-680J Erie Electric Mfg Corp (USA)
Related Parts
5895-00-349-3850INTERCHANGEABLE
BODY,PRIMER
A-577
5310-00-639-0274INTERCHANGEABLE
WASHER,FLAT
A2894
1560-00-975-1474INTERCHANGEABLE
STRUT ASSEMBLY,DOOR
A289-4

Frequently Asked Questions

What is NSN 5910-00-817-4723?

NSN 5910-00-817-4723 is a Capacitor,fixed,ceramic Dielectr, manufactured by Zenith Electronics Corporation, classified under FSC 5910 (No Item Name Available). Status: cancelled.

What are the part numbers for NSN 5910-00-817-4723?

NSN 5910-00-817-4723 has 14 cross-referenced part numbers: 22-3608 (Zenith Electronics Corporation), 68U2J680J (Maida Development Co), 801-020U2J0-680G (Erie Specialty Products Inc), 1510-10-3680 (Wavetek Rf Products, Inc), B95011J0258B100 (Hensoldt Sensors Gmbh) and 9 more.

What NSN replaces 5910-00-817-4723?

There are 3 known substitutes for 5910-00-817-4723: 5895-00-349-3850, 5310-00-639-0274, 1560-00-975-1474. Verify interchangeability with system specifications before substitution.

What are the specifications of 22-3608?

Key specifications for 22-3608: Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius: -120.0 TO 120.0 SINGLE SECTION; Tolerance Range Per Section: -2.00 TO 2.00 PERCENT SINGLE SECTION; Center to Center Distance Between Terminals Parallel to Diameter: 0.190 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN; Body Diameter: 0.350 INCHES NOMINAL IN. 20 total characteristics are documented in the Federal Logistics Information System.

Is NSN 5910-00-817-4723 still in active supply?

NSN 5910-00-817-4723 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com