PartsTable TECHNICAL DATA SHEET
NSN 5910-00-802-7555Government record, cited

Capacitor, Fixed, Electrolytic5910-00-802-7555

NSN 5910-00-802-7555 · NIIN 008027555 · Part number 1601117-1
Lockheed Martin Corporation Div Rms - Mitchel Field · FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components · CAGE 56232
Government record, cited
NSN 5910-00-802-7555 — this item is cataloged by the U.S. Government under National Stock Number 5910-00-802-7555. Manufacturer of record part number: 1601117-1.
Also searched as  5910-00-802-7555 · 5910008027555 · NIIN 008027555 · 00-802-7555 · FSC 5910 Capacitors · CAGE 56232 · 1601117-1 · E10A58A
Nearby stock numbers  ·
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Body Diameter: 3.063 INCHES NOMINAL IN
  • Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END
  • Tolerance Range Per Section: -10.00 TO 100.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 0.250 INCHES NOMINAL IN
  • Electrical Polarization: POLARIZED
Identification
  • NSN: 5910-00-802-7555
  • NIIN: 008027555
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 1601117-1
  • Manufacturer: Lockheed Martin Corporation Div Rms - Mitchel Field
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-00-802-7555, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corporation Div Rms - Mitchel Field. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-00-802-7555
Primary Part Number1601117-1
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — Capacitors
ManufacturerLockheed Martin Corporation Div Rms - Mitchel Field
StatusACTIVE
Body Diameter3.063 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES, TERMINAL(S) ON ONE END
Tolerance Range Per Section-10.00 TO 100.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length0.250 INCHES NOMINAL IN
Electrical PolarizationPOLARIZED
Center to Center Distance Between Terminals Parallel to Diameter1.250 INCHES NOMINAL IN
Equivalent Series Resistance at Reference Temp in Ohms0.198
Anode TypePLAIN FOIL
Nonderated Continuous Voltage Rating and Type Per Section350.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Case Insulation MaterialPLASTIC
Body Length4.500 INCHES NOMINAL IN
Capacitance Value Per Section700.000 MICROFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Capacitive Electrode MaterialALUMINUM
Terminal Type and Quantity2 SOLDER STUD
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
1601117-1 Lockheed Martin Corporation Div Rms - Mitchel Field (USA)
Reference documents
ReferenceMeaning
E10A58A 3/9 Design control — primary reference
Aerovox Corp.

Frequently Asked Questions

What is NSN 5910-00-802-7555?

NSN 5910-00-802-7555 is a Capacitor,fixed,electrolytic, manufactured by Lockheed Martin Corporation Div Rms - Mitchel Field, classified under FSC 5910, Capacitors. Status: active.

What part numbers are listed for NSN 5910-00-802-7555?

NSN 5910-00-802-7555 has 1 manufacturer part number on file: 1601117-1 (Lockheed Martin Corporation Div Rms - Mitchel Field).

What are the specifications of 1601117-1?

Key specifications for 1601117-1: Body Diameter: 3.063 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END; Tolerance Range Per Section: -10.00 TO 100.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5910-00-802-7555 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com