PartsTable TECHNICAL DATA SHEET
NSN 5910-00-766-8730Government record, cited

Capacitor, Variable, Glass Dielect5910-00-766-8730

NSN 5910-00-766-8730 · NIIN 007668730
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-00-766-8730 · 5910007668730 · NIIN 007668730 · 00-766-8730 · FSC 5910 Capacitors · MIL-C-14409/2 · PC36H140
Nearby stock numbers  ·
Features
  • Capacitor,variable,glass Dielect — FSC 5910
  • Shaft Type: ROUND, SLOTTED SINGLE SHAFT
  • Bushing Shape: ROUND W/FLAT
  • Bushing Length: 0.312 INCHES NOMINAL IN
  • Mounting Facility Type and Quantity: 1 THREADED BUSHING
  • Nonderated Voltage Rating and Type: 750.0 DC CONTINUOUS SINGLE SECTION
  • Shaft Diameter: 0.125 INCHES NOMINAL SINGLE SHAFT IN
  • Inclosure Type: ENCASED
Identification
  • NSN: 5910-00-766-8730
  • NIIN: 007668730
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,variable,glass Dielect, cataloged under National Stock Number 5910-00-766-8730, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-00-766-8730
Item NameCapacitor,variable,glass Dielect
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Shaft TypeROUND, SLOTTED SINGLE SHAFT
Bushing ShapeROUND W/FLAT
Bushing Length0.312 INCHES NOMINAL IN
Mounting Facility Type and Quantity1 THREADED BUSHING
Nonderated Voltage Rating and Type750.0 DC CONTINUOUS SINGLE SECTION
Shaft Diameter0.125 INCHES NOMINAL SINGLE SHAFT IN
Inclosure TypeENCASED
Capacitance Drift in Picofarads0.04 SINGLE SECTION
Body StylePISTON
Insulation DC Resistance at 25 Deg Celsius100.0 GIGOHMS
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Overall Diameter0.312 INCHES NOMINAL IN
Capacitance Range in Picofarads+0.8 TO 14.0 SINGLE SECTION
Mounting Facility Screw Thread Series DesignatorUNEF
Bushing Width0.230 INCHES NOMINAL IN
Nominal Thread Size0.250 INCHES IN
Shaft Length0.469 INCHES NOMINAL SINGLE SHAFT IN
Body Length0.719 INCHES NOMINAL IN
Bushing Diameter0.250 INCHES NOMINAL IN
Temp Coefficient of Capacitance Range in Ppm Per Deg Celsius-100.0 TO 100.0 SINGLE SECTION
Adjustment Device Torque1.000 INCH-OUNCES MINIMUM AND 10.000 INCH-OUNCES MAXIMUM IN
Adjustment Device Drive Type and Quantity1 SHAFT
Test Data Document81349-MIL-C-14409 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity1 WIRE LEAD
Quality Factor at 25 Deg Celsius500.0
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MIL-C-14409/2 4/1 Identification reference
U.S. Government activity
PC36H140 2/2 Government specification standardization
U.S. Government activity

Frequently Asked Questions

What is NSN 5910-00-766-8730?

NSN 5910-00-766-8730 is a Capacitor,variable,glass Dielect, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-00-766-8730?

Key specifications for 5910-00-766-8730: Shaft Type: ROUND, SLOTTED SINGLE SHAFT; Bushing Shape: ROUND W/FLAT; Bushing Length: 0.312 INCHES NOMINAL IN; Mounting Facility Type and Quantity: 1 THREADED BUSHING. 25 specifications are documented in the U.S. Government catalog.

Is NSN 5910-00-766-8730 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com