The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-00-466-3402, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-00-466-3402 |
| Item Name | Capacitor,fixed,electrolytic |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Body Diameter | 0.313 INCHES MAXIMUM IN |
| DC Leakage at Maximum Operating Temp | 10.0 MILLIAMPERES |
| Body Style | W/O MTG FACILITIES, AXIAL TERMINALS |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Power Factor at Reference Temp in Percent | 30.0000 |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 2.250 INCHES NOMINAL IN |
| Electrical Polarization | POLARIZED |
| Anode Type | SOLID |
| Nonderated Continuous Voltage Rating and Type Per Section | 25.0 DC SINGLE SECTION |
| Schematic Diagram Designator | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| Case Insulation Material | PLASTIC |
| Impedance at Minimum Operating Temp in Ohms | 50.0 |
| Body Length | 0.703 INCHES NOMINAL IN |
| Capacitance Value Per Section | 100.000 MICROFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Capacitive Electrode Material | TANTALUM |
| Mil-Std-1276 Wire Lead Type Designator | N-1 |
| Test Data Document | 81349-MILC39006 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MILC39006-9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| DC Leakage at Reference Temp | 1.000 MICROAMPERES |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MILC39006-9 | 5/9 Secondary reference U.S. Government activity |
| M39006/09-2174 | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-39006/9 | 4/1 Identification reference U.S. Government activity |
| CLR65BE101KEM | 5/1 Secondary reference U.S. Government activity |
NSN 5910-00-466-3402 is a Capacitor,fixed,electrolytic, classified under FSC 5910, Capacitors. Status: active.
Key specifications for 5910-00-466-3402: Body Diameter: 0.313 INCHES MAXIMUM IN; DC Leakage at Maximum Operating Temp: 10.0 MILLIAMPERES; Body Style: W/O MTG FACILITIES, AXIAL TERMINALS; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION. 22 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.