PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

5910PL0984538Capacitor,fixed,ceramic Dielectr

Jednolity Indeks Materialowy - Uniform Material Index · NSN 5910-00-404-2127 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-00-404-2127 — this item is cataloged by the U.S. Government under National Stock Number 5910-00-404-2127. Primary manufacturer part number: 5910PL0984538.
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
  • Terminal Length: 1.250 INCHES MINIMUM IN
  • Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION
  • Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S)
  • Test Data Document: 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • Nonderated Continuous Voltage Rating and Type Per Section: 200.0 DC SINGLE SECTION
  • Specification/standard Data: 81349-MIL-C-39014/1 GOVERNMENT SPECIFICATION
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
  • Applications requiring Plastic Case construction
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-00-404-2127, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Jednolity Indeks Materialowy - Uniform Material Index. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-00-404-2127
Primary Part Number5910PL0984538
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerJednolity Indeks Materialowy - Uniform Material Index
StatusACTIVE
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Terminal Length1.250 INCHES MINIMUM IN
Tolerance Range Per Section-10.00 TO 10.00 PERCENT SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Test Data Document81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Nonderated Continuous Voltage Rating and Type Per Section200.0 DC SINGLE SECTION
Specification/standard Data81349-MIL-C-39014/1 GOVERNMENT SPECIFICATION
Insulation Resistance at Maximum Operating Temp10000.0 MEGOHMS
Body Height0.090 INCHES NOMINAL IN
Capacitance Value Per Section10.000 PICOFARADS SINGLE SECTION
Terminal Diameter0.025 INCHES NOMINAL IN
Center to Center Distance Between Terminals Parallel to Length0.200 INCHES NOMINAL IN
Voltage Temp Limits Per Section in Percent Capacitance Change-25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
Body Width0.190 INCHES NOMINAL IN
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Body Length0.190 INCHES NOMINAL IN
Terminal Surface TreatmentSOLDER
Dissipation Factor at Reference Temp in Percent2.5000
MaterialPLASTIC CASE
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Reliability Failure Rate Level in Percent1.0000
Reliability IndicatorESTABLISHED
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 1
5910-00-112-4337 INTERCHANGEABLE
Capacitor,fixed,ceramic Dielectr
Cross-Reference Index
Part NumberManufacturer
5910PL0984538 Jednolity Indeks Materialowy - Uniform Material Index (POL)
MILC39014-1 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
M39014-01-0201 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
CKR05BX100KM Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
4111888-35 Raytheon Company Div Rmd Strategic (USA)
4111888-035 Raytheon Company Div Rmd Strategic (USA)
Related Parts
5910-00-112-4337INTERCHANGEABLE
CAPACITOR,FIXED,CERAMIC DIELECTR

Frequently Asked Questions

What is NSN 5910-00-404-2127?

NSN 5910-00-404-2127 is a Capacitor,fixed,ceramic Dielectr, manufactured by Jednolity Indeks Materialowy - Uniform Material Index, classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-00-404-2127?

NSN 5910-00-404-2127 has 6 cross-referenced part numbers: 5910PL0984538 (Jednolity Indeks Materialowy - Uniform Material Index), MILC39014-1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M39014-01-0201 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CKR05BX100KM (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 4111888-35 (Raytheon Company Div Rmd Strategic) and 1 more.

What NSN replaces 5910-00-404-2127?

There is 1 known substitute for 5910-00-404-2127: 5910-00-112-4337. Verify interchangeability with system specifications before substitution.

What are the specifications of 5910PL0984538?

Key specifications for 5910PL0984538: Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC; Terminal Length: 1.250 INCHES MINIMUM IN; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION; Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S). 23 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com