PartsTable TECHNICAL DATA SHEET
NSN 5910-00-361-8602Government record, cited

Capacitor, Fixed, Ceramic Dielectr5910-00-361-8602

NSN 5910-00-361-8602 · NIIN 003618602
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-00-361-8602 · 5910003618602 · NIIN 003618602 · 00-361-8602 · FSC 5910 Capacitors
Nearby stock numbers  ·
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Width Across Flats: 0.312 INCHES NOMINAL IN
  • Body Style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
  • Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Mounting Facility Screw Thread Series Designator: UNF
  • Nonderated Continuous Voltage Rating and Type Per Section: 500.0 DC SINGLE SECTION
Identification
  • NSN: 5910-00-361-8602
  • NIIN: 003618602
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-00-361-8602, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-00-361-8602
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Width Across Flats0.312 INCHES NOMINAL IN
Body StyleW/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
Tolerance Range Per Section-20.00 TO 20.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Mounting Facility Screw Thread Series DesignatorUNF
Nonderated Continuous Voltage Rating and Type Per Section500.0 DC SINGLE SECTION
Schematic Diagram DesignatorELECTRODE(S) GROUNDED TO CASE
Nominal Thread Size0.250 INCHES IN
Body Length0.782 INCHES NOMINAL IN
Dissipation Factor at Reference Temp in Percent2.0000
Capacitance Value Per Section1500.000 PICOFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Voltage Temp Limits Per Section in Percent Capacitance Change-66.0 TO 22.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
Terminal Type and Quantity1 SOLDER STUD
Insulation Resistance at Reference Temp20000.0 MEGOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3110-00-822-0265513403 POSSIBLE MATCH
PLATE,RETAINING,BEARING
Possible match (shared part number)Honeywell International, Inc Div Aerospace-Tucson
6695-01-565-1579 POSSIBLE MATCH
TRANSDUCER,MOTIONAL PICKUP
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
513403 3/9 Design control — primary reference
Trilon Electronics Corp
Related Parts
3110-00-822-0265POSSIBLE MATCH
PLATE,RETAINING,BEARING
513403
6695-01-565-1579POSSIBLE MATCH
TRANSDUCER,MOTIONAL PICKUP

Frequently Asked Questions

What is NSN 5910-00-361-8602?

NSN 5910-00-361-8602 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.

What NSN replaces 5910-00-361-8602?

2 possible matches (shared part number, not a government interchangeability claim): 3110-00-822-0265, 6695-01-565-1579. Verify interchangeability with system specifications before substitution.

What are the specifications of 5910-00-361-8602?

Key specifications for 5910-00-361-8602: Width Across Flats: 0.312 INCHES NOMINAL IN; Body Style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS; Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5910-00-361-8602 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com