The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-00-359-9739, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 10 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-00-359-9739 |
| Primary Part Number | MILC39014-20 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Test Data Document | 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Center to Center Distance Between Terminals Parallel to Length | 0.200 INCHES NOMINAL IN |
| Body Length | 0.290 INCHES NOMINAL IN |
| Body Width | 0.290 INCHES NOMINAL IN |
| Nonderated Continuous Voltage Rating and Type Per Section | 50.0 DC SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Specification/standard Data | 81349-MIL-C-39014/20 GOVERNMENT SPECIFICATION |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Capacitance Value Per Section | 2.000 MICROFARADS SINGLE SECTION |
| Terminal Diameter | 0.025 INCHES NOMINAL IN |
| Body Height | 0.130 INCHES NOMINAL IN |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Voltage Temp Limits Per Section in Percent Capacitance Change | -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Terminal Surface Treatment | SOLDER |
| Dissipation Factor at Reference Temp in Percent | 2.5000 |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Material | PLASTIC CASE |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Reliability Indicator | ESTABLISHED |
| Reliability Failure Rate Level in Percent | 1.0000 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MILC39014-20 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-00-359-9739 is a Capacitor,fixed,ceramic Dielectr, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-00-359-9739 has 1 cross-referenced part number: MILC39014-20 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 10 known substitutes for 5910-00-359-9739: 5910-01-039-3055, 5910-01-095-3992, 5910-01-095-6373 and 7 more. Verify interchangeability with system specifications before substitution.
Key specifications for MILC39014-20: Test Data Document: 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Center to Center Distance Between Terminals Parallel to Length: 0.200 INCHES NOMINAL IN; Body Length: 0.290 INCHES NOMINAL IN; Body Width: 0.290 INCHES NOMINAL IN. 23 total characteristics are documented in the Federal Logistics Information System.