The Capacitor,variable,air Dielectri, cataloged under National Stock Number 5910-00-186-7333, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Pax Mfg Corp Hammarlund Mfg Co Div. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-00-186-7333 |
| Primary Part Number | 45-5P410-2 |
| Item Name | Capacitor,variable,air Dielectri |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Pax Mfg Corp Hammarlund Mfg Co Div |
| Status | ACTIVE |
| Shaft Type | ROUND SINGLE SHAFT |
| Mounting Facility Type and Quantity | 3 UNTHREADED HOLE(S) |
| Shaft Diameter | 0.250 INCHES NOMINAL SINGLE SHAFT IN |
| Inclosure Type | UNINCLOSED |
| Adjustment Device Rotation | 180.0 DEGREES NOMINAL COUNTERCLOCKWISE |
| Capacitance Range in Picofarads | +25.3 TO 207.0 ALL SECTIONS |
| Individual Section Quantity | 3 |
| Tuning Characteristic | STRAIGHT LINE CAPACITY ALL SECTIONS |
| Shaft Length | 0.625 INCHES NOMINAL SINGLE SHAFT IN |
| Adjustment Device Drive Type and Quantity | 3 SHAFT |
| Terminal Type and Quantity | 3 WIRE LEAD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 45-5P410-2 PRIMARY | Pax Mfg Corp Hammarlund Mfg Co Div (USA) |
| I601410-2 PRIMARY | Pax Mfg Corp Hammarlund Mfg Co Div (USA) |
NSN 5910-00-186-7333 is a Capacitor,variable,air Dielectri, manufactured by Pax Mfg Corp Hammarlund Mfg Co Div, classified under FSC 5910, Capacitors. Status: active.
NSN 5910-00-186-7333 has 2 manufacturer part numbers on file: 45-5P410-2 (Pax Mfg Corp Hammarlund Mfg Co Div), I601410-2 (Pax Mfg Corp Hammarlund Mfg Co Div).
Key specifications for 45-5P410-2: Shaft Type: ROUND SINGLE SHAFT; Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S); Shaft Diameter: 0.250 INCHES NOMINAL SINGLE SHAFT IN; Inclosure Type: UNINCLOSED. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.