The Capacitor,variable,air Dielectri, cataloged under National Stock Number 5910-00-186-7264, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-00-186-7264 |
| Item Name | Capacitor,variable,air Dielectri |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Shaft Type | ROUND SINGLE SHAFT |
| Mounting Facility Type and Quantity | 3 UNTHREADED HOLE(S) |
| Nonderated Voltage Rating and Type | 500.0 AC PEAK ALL SECTIONS |
| Shaft Diameter | 0.250 INCHES NOMINAL SINGLE SHAFT IN |
| Inclosure Type | UNINCLOSED |
| Body Style | IRREGULAR |
| Adjustment Device Rotation | 180.0 DEGREES NOMINAL CLOCKWISE AND 180.0 DEGREES NOMINAL COUNTERCLOCKWISE |
| Capacitance Range in Picofarads | +2.0 TO 10.0 ALL SECTIONS |
| Unthreaded Mounting Hole Diameter | 0.144 INCHES NOMINAL IN |
| Individual Section Quantity | 2 |
| Tuning Characteristic | STRAIGHT LINE CAPACITY ALL SECTIONS |
| Shaft Length | 0.750 INCHES NOMINAL SINGLE SHAFT IN |
| Adjustment Device Drive Type and Quantity | 1 SHAFT |
| Terminal Type and Quantity | 6 TAB, SOLDER LUG |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| P36J862 | 3/9 Design control — primary reference General Electric Co Capacitors Div |
NSN 5910-00-186-7264 is a Capacitor,variable,air Dielectri, classified under FSC 5910, Capacitors. Status: active.
Key specifications for 5910-00-186-7264: Shaft Type: ROUND SINGLE SHAFT; Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S); Nonderated Voltage Rating and Type: 500.0 AC PEAK ALL SECTIONS; Shaft Diameter: 0.250 INCHES NOMINAL SINGLE SHAFT IN. 14 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.