PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

MILC39006-1Capacitor,fixed,electrolytic

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M · NSN 5910-00-175-4311 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-00-175-4311 — this item is cataloged by the U.S. Government under National Stock Number 5910-00-175-4311. Primary manufacturer part number: MILC39006-1.
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Anode Type: ETCHED FOIL
  • Mil-Std-1276 Wire Lead Type Designator: N-3
  • Terminal Length: 1.500 INCHES NOMINAL IN
  • Electrical Polarization: POLARIZED
  • Body Diameter: 0.406 INCHES MAXIMUM IN
  • Specification/standard Data: 81349-MIL-C-39006/1 GOVERNMENT SPECIFICATION
  • Dissipation Factor at Reference Temp in Percent: 20.0000
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-00-175-4311, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-00-175-4311
Primary Part NumberMILC39006-1
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerMilitary Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
StatusACTIVE
Anode TypeETCHED FOIL
Mil-Std-1276 Wire Lead Type DesignatorN-3
Terminal Length1.500 INCHES NOMINAL IN
Electrical PolarizationPOLARIZED
Body Diameter0.406 INCHES MAXIMUM IN
Specification/standard Data81349-MIL-C-39006/1 GOVERNMENT SPECIFICATION
Dissipation Factor at Reference Temp in Percent20.0000
Case Insulation MaterialPLASTIC
Capacitive Electrode MaterialTANTALUM
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Test Data Document81349-MIL-C-39006 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
DC Leakage at Reference Temp4.000 MICROAMPERES
Reliability Failure Rate Level in Percent2.0000
Body StyleW/O MTG FACILITIES, AXIAL TERMINALS
Features ProvidedHERMETICALLY SEALED CASE
DC Leakage at Maximum Operating Temp75.0 MILLIAMPERES
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Tolerance Range Per Section-15.00 TO 50.00 PERCENT SINGLE SECTION
Body Length2.203 INCHES NOMINAL IN
Capacitance Value Per Section100.000 MICROFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Impedance at Minimum Operating Temp in Ohms33.0
Nonderated Continuous Voltage Rating and Type Per Section50.0 DC SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 2
5910-00-009-6738 INTERCHANGEABLE
Capacitor,fixed,electrolytic
5910-00-175-4632 INTERCHANGEABLE
Capacitor,fixed,electrolytic
Cross-Reference Index
Part NumberManufacturer
MILC39006-1 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
M39006-01-3016 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Related Parts
5910-00-009-6738INTERCHANGEABLE
CAPACITOR,FIXED,ELECTROLYTIC
5910-00-175-4632INTERCHANGEABLE
CAPACITOR,FIXED,ELECTROLYTIC

Frequently Asked Questions

What is NSN 5910-00-175-4311?

NSN 5910-00-175-4311 is a Capacitor,fixed,electrolytic, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-00-175-4311?

NSN 5910-00-175-4311 has 2 cross-referenced part numbers: MILC39006-1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M39006-01-3016 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).

What NSN replaces 5910-00-175-4311?

There are 2 known substitutes for 5910-00-175-4311: 5910-00-009-6738, 5910-00-175-4632. Verify interchangeability with system specifications before substitution.

What are the specifications of MILC39006-1?

Key specifications for MILC39006-1: Anode Type: ETCHED FOIL; Mil-Std-1276 Wire Lead Type Designator: N-3; Terminal Length: 1.500 INCHES NOMINAL IN; Electrical Polarization: POLARIZED. 24 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com