PartsTable TECHNICAL DATA SHEET
NSN 5910-00-160-4803Government record, cited

Capacitor, Fixed, Paper Dielectric5910-00-160-4803

NSN 5910-00-160-4803 · NIIN 001604803
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-00-160-4803 · 5910001604803 · NIIN 001604803 · 00-160-4803 · FSC 5910 Capacitors · DD3001 · MC976 · MIL-C-12889/3 · CA47BFU103 · 611925
Nearby stock numbers  ·
Features
  • Capacitor,fixed,paper Dielectric — FSC 5910
  • Mounting Facility Type and Quantity: 1 UNTHREADED MOUNTING HOLES
  • Body Style: W/MTG TAB, TERMINAL(S) ON ONE SURFACE
  • Tolerance Range Per Section: -30.00 TO 0.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Length: 0.375 INCHES NOMINAL IN
  • Body Width: 0.750 INCHES NOMINAL IN
  • Body Height: 0.250 INCHES NOMINAL IN
Identification
  • NSN: 5910-00-160-4803
  • NIIN: 001604803
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,paper Dielectric, cataloged under National Stock Number 5910-00-160-4803, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-00-160-4803
Item NameCapacitor,fixed,paper Dielectric
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Mounting Facility Type and Quantity1 UNTHREADED MOUNTING HOLES
Body StyleW/MTG TAB, TERMINAL(S) ON ONE SURFACE
Tolerance Range Per Section-30.00 TO 0.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Length0.375 INCHES NOMINAL IN
Body Width0.750 INCHES NOMINAL IN
Body Height0.250 INCHES NOMINAL IN
Unthreaded Mounting Hole Diameter0.281 INCHES NOMINAL IN
Features ProvidedHERMETICALLY SEALED CASE
Nonderated Continuous Voltage Rating and Type Per Section250.0 AC/DC SINGLE SECTION
Schematic Diagram DesignatorELECTRODE(S) GROUNDED TO CASE
Specification/standard Data81349-MIL-C-12889/3 GOVERNMENT SPECIFICATION
Body Length0.750 INCHES NOMINAL IN
Dissipation Factor at Reference Temp in Percent1.500
Capacitance Value Per Section10000.000 PICOFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Insulation Resistance at Maximum Operating Temp15.0 MEGOHM-MICROFARADS
Test Data Document81349-MIL-C-12889 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity1 TAB, SOLDER LUG
Insulation Resistance at Reference Temp1500.0 MEGOHM-MICROFARADS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3510-00-411-26696-1-1925-27-39 POSSIBLE MATCH
RECORD,LOCK ASSEMBLY
Possible match (shared part number)W1d1 Natick Soldier Center Dba Us Army Ccdc Soldier Center Div Combat Capabilities Development Command - Soldier Center
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
DD3001 C/1 Advisory reference — outside the item-of-supply concept
American Standard Inc Westinghouse Air Brake Co Div
MC976 C/1 Advisory reference — outside the item-of-supply concept
Cornell-Dubilier Electronics
MIL-C-12889/3 4/1 Identification reference
U.S. Government activity
CA47BFU103 2/2 Government specification standardization
U.S. Government activity
611925 C/1 Advisory reference — outside the item-of-supply concept
Magna Tech Electronic Co Inc Dba Mte
S24356 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
Related Parts
3510-00-411-2669POSSIBLE MATCH
RECORD,LOCK ASSEMBLY
6-1-1925-27-39

Frequently Asked Questions

What is NSN 5910-00-160-4803?

NSN 5910-00-160-4803 is a Capacitor,fixed,paper Dielectric, classified under FSC 5910, Capacitors. Status: active.

What NSN replaces 5910-00-160-4803?

1 possible match (shared part number, not a government interchangeability claim): 3510-00-411-2669. Verify interchangeability with system specifications before substitution.

What are the specifications of 5910-00-160-4803?

Key specifications for 5910-00-160-4803: Mounting Facility Type and Quantity: 1 UNTHREADED MOUNTING HOLES; Body Style: W/MTG TAB, TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -30.00 TO 0.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5910-00-160-4803 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com