The Capacitor,fixed,mica Dielectric, cataloged under National Stock Number 5910-00-134-0649, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-00-134-0649 |
| Primary Part Number | CM12FD103G03 |
| Item Name | Capacitor,fixed,mica Dielectric |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Test Data Document | 81349-MILC5/18 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Body Width | 1.031 INCHES MAXIMUM IN |
| Nonderated Continuous Voltage Rating and Type Per Section | 500.0 DC SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Body Height | 0.270 INCHES NOMINAL IN |
| Terminal Surface Treatment | SOLDER |
| Material | PLASTIC CASE |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Dissipation Factor at Reference Temp in Percent | 0.0014 |
| Capacitance Value Per Section | 10000.000 PICOFARADS SINGLE SECTION |
| Insulation Resistance at Maximum Operating Temp | 33.0 MEGOHM-MICROFARADS |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Terminal Length | 1.000 INCHES MINIMUM IN |
| Body Length | 0.750 INCHES NOMINAL IN |
| Temp Coefficient of Capacitance Range Per Section in Ppm Per Deg Celsius | +0.0 TO 70.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.394 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN |
| Tolerance Range Per Section | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| CM12FD103G03 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILC5-18 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-00-134-0649 is a Capacitor,fixed,mica Dielectric, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-00-134-0649 has 2 cross-referenced part numbers: CM12FD103G03 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MILC5-18 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5910-00-134-0649: 5910-01-010-7562. Verify interchangeability with system specifications before substitution.
Key specifications for CM12FD103G03: Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC; Test Data Document: 81349-MILC5/18 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Body Width: 1.031 INCHES MAXIMUM IN; Nonderated Continuous Voltage Rating and Type Per Section: 500.0 DC SINGLE SECTION. 20 total characteristics are documented in the Federal Logistics Information System.