PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

MILC39014-2Capacitor,fixed,ceramic Dielectr

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M · NSN 5910-00-116-8653 · FSC 5910 · No Item Name Available
Verified by PartsTable
NSN 5910-00-116-8653 — this item is cataloged by the U.S. Government under National Stock Number 5910-00-116-8653. Primary manufacturer part number: MILC39014-2.
Features
  • Capacitor,fixed,ceramic Dielectr — FSC 5910
  • Body Length: 0.290 INCHES NOMINAL IN
  • Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD
  • Body Height: 0.090 INCHES NOMINAL IN
  • Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S)
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
  • Center to Center Distance Between Terminals Parallel to Length: 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
  • Insulation Resistance at Maximum Operating Temp: 10000.0 MEGOHMS
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
  • Applications requiring Plastic Case construction
General Description

The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-00-116-8653, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 8 commercial cross-references from 6 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-00-116-8653
Primary Part NumberMILC39014-2
Item NameCapacitor,fixed,ceramic Dielectr
FSC / FSG5910 / 59 — No Item Name Available
ManufacturerMilitary Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
StatusACTIVE
Body Length0.290 INCHES NOMINAL IN
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Body Height0.090 INCHES NOMINAL IN
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
Center to Center Distance Between Terminals Parallel to Length0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
Insulation Resistance at Maximum Operating Temp10000.0 MEGOHMS
Nonderated Continuous Voltage Rating and Type Per Section200.0 DC SINGLE SECTION
Terminal Diameter0.025 INCHES NOMINAL IN
Specification/standard Data81349-MIL-C-39014/2 GOVERNMENT SPECIFICATION
Test Data Document81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Capacitance Value Per Section10000.000 PICOFARADS SINGLE SECTION
Voltage Temp Limits Per Section in Percent Capacitance Change-15.0 TO 25.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
Terminal Length1.250 INCHES MINIMUM IN
Tolerance Range Per Section-10.00 TO 10.00 PERCENT SINGLE SECTION
Body Width0.290 INCHES NOMINAL IN
Terminal Surface TreatmentSOLDER
MaterialPLASTIC CASE
Insulation Resistance at Reference Temp100000.0 MEGOHMS
Dissipation Factor at Reference Temp in Percent2.5000
Reliability Failure Rate Level in Percent1.0000
Reliability IndicatorESTABLISHED
Body StyleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 1
5910-00-010-8718 INTERCHANGEABLE
Capacitor,fixed,ceramic Dielectr
Cross-Reference Index
Part NumberManufacturer
MILC39014-2 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
4111888-6 Raytheon Company Div Rmd Strategic (USA)
CKR06BX103KM Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
8133L4CREW5R103K Erie Specialty Products Inc (USA)
538137-218 Raytheon Company Dba Raytheon (USA)
42000838-103 Dne Technologies, Inc (USA)
5910PL0819347 Jednolity Indeks Materialowy - Uniform Material Index (POL)
M39014-02-0218 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Related Parts
5910-00-010-8718INTERCHANGEABLE
CAPACITOR,FIXED,CERAMIC DIELECTR

Frequently Asked Questions

What is NSN 5910-00-116-8653?

NSN 5910-00-116-8653 is a Capacitor,fixed,ceramic Dielectr, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.

What are the part numbers for NSN 5910-00-116-8653?

NSN 5910-00-116-8653 has 8 cross-referenced part numbers: MILC39014-2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 4111888-6 (Raytheon Company Div Rmd Strategic), CKR06BX103KM (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 8133L4CREW5R103K (Erie Specialty Products Inc), 538137-218 (Raytheon Company Dba Raytheon) and 3 more.

What NSN replaces 5910-00-116-8653?

There is 1 known substitute for 5910-00-116-8653: 5910-00-010-8718. Verify interchangeability with system specifications before substitution.

What are the specifications of MILC39014-2?

Key specifications for MILC39014-2: Body Length: 0.290 INCHES NOMINAL IN; Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD; Body Height: 0.090 INCHES NOMINAL IN; Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S). 23 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com