The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-00-113-7671, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Hensoldt Sensors Gmbh. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 12 commercial cross-references from 11 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-00-113-7671 |
| Primary Part Number | B95004J0067B100 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Hensoldt Sensors Gmbh |
| Status | ACTIVE |
| Body Height | 0.090 INCHES NOMINAL IN |
| Center to Center Distance Between Terminals Parallel to Length | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Voltage Temp Limits Per Section in Percent Capacitance Change | -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION |
| Capacitance Value Per Section | 47000.000 PICOFARADS SINGLE SECTION |
| Test Data Document | 81349-MILC11015-18 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Nonderated Continuous Voltage Rating and Type Per Section | 50.0 DC SINGLE SECTION |
| Body Length | 0.190 INCHES NOMINAL IN |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Body Width | 0.190 INCHES NOMINAL IN |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Material | PLASTIC CASE |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Dissipation Factor at Reference Temp in Percent | 2.5000 |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Reliability Indicator | NOT ESTABLISHED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| B95004J0067B100 | Hensoldt Sensors Gmbh (DEU) |
| 352250008014 | Thales Nederland (NLD) |
| 7901102-83 | Lockheed Martin Corp Dba Lockheed Martin Div Mst - Eagan (USA) |
| Q 317 214 034 | Rheinmetall Air Defence Ag (CHE) |
| 913-5019-281 | Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems (USA) |
| MILC11015-18 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Q 317 214 034 | Rheinmetall Soldier Electronics Gmbh (DEU) |
| 418291-58 | Raytheon Company Dba Raytheon (USA) |
| CK05BX473K | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 99097268 | Thales Sa (FRA) |
| CB404307 | Invisio Communications Ltd (GBR) |
| 99097268 | Thales Training Et Simulation SAS (FRA) |
NSN 5910-00-113-7671 is a Capacitor,fixed,ceramic Dielectr, manufactured by Hensoldt Sensors Gmbh, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-00-113-7671 has 12 cross-referenced part numbers: B95004J0067B100 (Hensoldt Sensors Gmbh), 352250008014 (Thales Nederland), 7901102-83 (Lockheed Martin Corp Dba Lockheed Martin Div Mst - Eagan), Q 317 214 034 (Rheinmetall Air Defence Ag), 913-5019-281 (Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems) and 7 more.
There is 1 known substitute for 5910-00-113-7671: 5910-00-113-5278. Verify interchangeability with system specifications before substitution.
Key specifications for B95004J0067B100: Body Height: 0.090 INCHES NOMINAL IN; Center to Center Distance Between Terminals Parallel to Length: 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION; Terminal Type and Quantity: 2 UNINSULATED WIRE LEAD. 19 total characteristics are documented in the Federal Logistics Information System.