The Capacitor,variable,ceramic Diele, cataloged under National Stock Number 5910-00-112-8247, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Erie Specialty Products Inc. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-00-112-8247 |
| Primary Part Number | 507001C7-0-45 |
| Item Name | Capacitor,variable,ceramic Diele |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Erie Specialty Products Inc |
| Status | ACTIVE |
| Unthreaded Mounting Hole Diameter | 0.145 INCHES NOMINAL IN |
| Terminal Type and Quantity | 2 TAB, SOLDER LUG |
| Test Data Document | 81349-MIL-C-81 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Capacitance Change in Percent at Operating Temp From 25 Deg Celsius | +1.00 TO 6.50 MINIMUM AND -4.00/-1.00 MAXIMUM SINGLE SECTION |
| Insulation DC Resistance at 25 Deg Celsius | 10.0 GIGOHMS |
| Body Style | ROTARY |
| Capacitance Range in Picofarads | +7.0 TO 45.0 SINGLE SECTION |
| Inclosure Type | ENCAPSULATED |
| Adjustment Device Torque | 4.000 INCH-OUNCES MINIMUM AND 24.000 INCH-OUNCES MAXIMUM IN |
| Body Height | 0.406 INCHES MAXIMUM IN |
| Capacitance Drift in Picofarads | 0.50 SINGLE SECTION |
| Mounting Facility Type and Quantity | 2 UNTHREADED HOLE(S) |
| Nonderated Voltage Rating and Type | 500.0 DC CONTINUOUS SINGLE SECTION |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Length | 0.840 INCHES NOMINAL IN |
| Dissipation Factor at 25 Deg Celsius in Percent | 0.2 |
| Body Length | 1.120 INCHES NOMINAL IN |
| Adjustment Device Drive Type and Quantity | 1 SLOTTED SCREW |
| Body Width | 0.620 INCHES NOMINAL IN |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 507001C7-0-45 | Erie Specialty Products Inc (USA) |
| MIL-C-81/2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| CV14C450 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILC81 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 507001C7-0-45 | Tusonix, Llc (USA) |
NSN 5910-00-112-8247 is a Capacitor,variable,ceramic Diele, manufactured by Erie Specialty Products Inc, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-00-112-8247 has 5 cross-referenced part numbers: 507001C7-0-45 (Erie Specialty Products Inc), MIL-C-81/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CV14C450 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MILC81 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 507001C7-0-45 (Tusonix, Llc).
There are 12 known substitutes for 5910-00-112-8247: 5910-00-126-1613, 5910-00-160-1207, 5910-00-160-6755 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for 507001C7-0-45: Unthreaded Mounting Hole Diameter: 0.145 INCHES NOMINAL IN; Terminal Type and Quantity: 2 TAB, SOLDER LUG; Test Data Document: 81349-MIL-C-81 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Capacitance Change in Percent at Operating Temp From 25 Deg Celsius: +1.00 TO 6.50 MINIMUM AND -4.00/-1.00 MAXIMUM SINGLE SECTION. 19 total characteristics are documented in the Federal Logistics Information System.