PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5906932-1
5906932-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SEAT,BEARING is a the manufacturer industrial component. Key specifications include bore_diameter: 0.8770 INCHES MINIMUM AND 0.8770 INCHES MINIMUM AND 0.8870 INCHES MAXIMUM0.8870 INCHES MAXIMUM IN, overall_width: 0.1230 INCHES MINIMUM AND 0.1230 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM0.1260 INCHES MAXIMUM IN, outside_diameter: 1.4070 INCHES MINIMUM AND 1.4070 INCHES MINIMUM AND 1.4270 INCHES MAXIMUM1.4270 INCHES MAXIMUM IN, style_designator: FLAT RACE SURFACEFLAT RACE SURFACE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-351-6421, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5906932-1
NSN: 3110-01-351-6421
FSC: 3110
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
bore_diameter0.8770 INCHES MINIMUM AND 0.8770 INCHES MINIMUM AND 0.8870 INCHES MAXIMUM0.8870 INCHES MAXIMUM IN
overall_width0.1230 INCHES MINIMUM AND 0.1230 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM0.1260 INCHES MAXIMUM IN
outside_diameter1.4070 INCHES MINIMUM AND 1.4070 INCHES MINIMUM AND 1.4270 INCHES MAXIMUM1.4270 INCHES MAXIMUM IN
style_designatorFLAT RACE SURFACEFLAT RACE SURFACE
NSN3110-01-351-6421
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5906932-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.4070 INCHES MINIMUM AND 1.4070 INCHES MINIMUM AND 1.4270 INCHES MAXIMUM1.4270 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.8770 INCHES MINIMUM AND 0.8770 INCHES MINIMUM AND 0.8870 INCHES MAXIMUM0.8870 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT RACE SURFACEFLAT RACE SURFACE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.4070 INCHES MINIMUM AND 1.4070 INCHES MINIMUM AND 1.4270 INCHES MAXIMUM1.4270 INCHES MAXIMUM IN
BORE DIAMETER0.8770 INCHES MINIMUM AND 0.8770 INCHES MINIMUM AND 0.8870 INCHES MAXIMUM0.8870 INCHES MAXIMUM IN
OVERALL WIDTH0.1230 INCHES MINIMUM AND 0.1230 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM0.1260 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT RACE SURFACEFLAT RACE SURFACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
TWD 1423Interchangeable
interchangeable cross-reference
interchangeable
TRD-1423Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5906932-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5906932-1?
5906932-1 is a SEAT,BEARING.
What parts can replace 5906932-1?
There are 2 known substitutes for 5906932-1: TWD 1423, TRD-1423. Substitute compatibility should be verified for your specific system.
What is the NSN for 5906932-1?
5906932-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-351-6421. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5906932-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026