PartsTable
Technical Data Sheet
Download PDF

5905238 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5905238: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 SPRING, seal_width: 0.129 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, construction: ONE-PIECE, housing_bore_diameter: 5.099 INCHES MINIMUM AND 5.129 INCHES MAXIMUM IN, accommodated_shaft_diameter: 4.850 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-344-5561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5905238
NSN: 5330-01-344-5561
FSC: 5330 — Packing and Gasket Materials
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 304 SPRING
seal_width0.129 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
constructionONE-PIECE
housing_bore_diameter5.099 INCHES MINIMUM AND 5.129 INCHES MAXIMUM IN
accommodated_shaft_diameter4.850 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
material_document_and_classificationMIL-S-5059 3/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE SPRING
NSN5330-01-344-5561
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5905238 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.129 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 5.099 INCHES MINIMUM AND 5.129 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D1457,TY 4 ASSN STD SINGLE MATERIAL RESPONSE CASE
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 4.850 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.129 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
HOUSING BORE DIAMETER5.099 INCHES MINIMUM AND 5.129 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D1457,TY 4 ASSN STD SINGLE MATERIAL RESPONSE CASE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 3/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE SPRING
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER4.850 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE CASE
MATERIALSTEEL COMP 304 SPRING
CONSTRUCTIONONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5905238?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5905238?
5905238 is a SEAL,PLAIN.
What is the NSN for 5905238?
5905238 is cataloged in the U.S. Government catalog under NSN 5330-01-344-5561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5905238