PartsTable TECHNICAL DATA SHEET
NSN 5905-00-917-3466Government record, cited

Resistor, Variable, Wire Wound, Pre5905-00-917-3466

NSN 5905-00-917-3466 · NIIN 009173466 · Part number 10558459-2
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 19200
Government record, cited
NSN 5905-00-917-3466 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-917-3466. Manufacturer of record part number: 10558459-2.
Also searched as  5905-00-917-3466 · 5905009173466 · NIIN 009173466 · 00-917-3466 · FSC 5905 Resistor · CAGE 19200 · 10558459-2 · 5905009173466 · 11317250-2 · 3500S2-201 · 3500S-2-201
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Nonturn Device Location: AT 7 OCLOCK
  • Body Diameter: 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 32.0
  • Lateral Runout: 0.005 INCHES IN
  • Electrical Resistance Per Section: 200.0 OHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 125.0 SINGLE SECTION
  • Section Quantity: 1
Identification
  • NSN: 5905-00-917-3466
  • NIIN: 009173466
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 10558459-2
  • Manufacturer: Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-917-3466, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-917-3466
Primary Part Number10558459-2
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerCombat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
StatusACTIVE
Nonturn Device LocationAT 7 OCLOCK
Body Diameter0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch32.0
Lateral Runout0.005 INCHES IN
Electrical Resistance Per Section200.0 OHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power125.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.250 INCHES NOMINAL IN
Nonturn Device Radius0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
Function Characteristic Per SectionSINGLE SECTION LINEAR
Body StyleCYLINDRICAL BUSHING MOUNTED
Function Conformity Tolerance Per Section-0.20 TO 0.20 SINGLE SECTION
Shaft End Play0.005 INCHES IN
Overall Diameter1.063 INCHES NOMINAL IN
Contact Arm Electrical Off PositionFULLY CCW-CW
Mounting MethodSTANDARD BUSHING
Maximum Starting Torque0.60 INCH-OUNCES IN
Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius-20.0 TO 20.0 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
Body Length0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
Maximum Stop Torque48.00 INCH-OUNCES IN
Shaft Runout0.002 INCHES IN
Power Dissipation Rating Per Section in Watts2.0 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation3600.0 MINIMUM AND 3610.0 MAXIMUM
Pilot Diameter Runout0.002 INCHES IN
Screw Thread Diameter0.375 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
10558459-2 Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA)
Reference documents
ReferenceMeaning
5905009173466 5/9 Secondary reference
E.c.a Etablissement Centrald'approvisionnement Des Forces Armee
11317250-2 5/9 Secondary reference
Ballistic Missile Defense Systems Command
3500S2-201 C/1 Advisory reference — outside the item-of-supply concept
Bourns Inc
3500S-2-201 3/9 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136
RESISTOR NETWORK,FIXED,FILM
5905-00-000-0488
5905-00-000-0488 · Item name not on file
5905-00-000-8809
5905-00-000-8809 · Item name not on file
5905-00-000-8833
5905-00-000-8833 · Item name not on file
5905-00-000-9526
5905-00-000-9526 · Item name not on file
5905-00-001-1342
5905-00-001-1342 · Item name not on file
5905-00-001-1573
5905-00-001-1573 · Item name not on file
5905-00-001-2059
5905-00-001-2059 · Item name not on file

Frequently Asked Questions

What is NSN 5905-00-917-3466?

NSN 5905-00-917-3466 is a Resistor,variable,wire Wound,pre, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-917-3466?

NSN 5905-00-917-3466 has 1 manufacturer part number on file: 10558459-2 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).

What are the specifications of 10558459-2?

Key specifications for 10558459-2: Nonturn Device Location: AT 7 OCLOCK; Body Diameter: 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Lateral Runout: 0.005 INCHES IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-917-3466 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com